GasGas Riders Club Forum  

Go Back   GasGas Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine 4 stroke (including EFI & Exhaust)

Enduro Engine 4 stroke (including EFI & Exhaust) 4 stroke engine, EFI, and exhaust discussion


Reply
 
Thread Tools Display Modes
  #1  
Old 06-07-2019, 05:12 AM
andrius7 andrius7 is offline
Member
 
Join Date: Feb 2019
Posts: 9
Default Slipping cluch

Hi all, just fitted new set on my fse, after a half hour of riding it startas to slip on 4,5,6 gears


Reply With Quote


  #2  
Old 06-07-2019, 05:17 AM
Anders's Avatar
Anders Anders is offline
Gold Level Site Supporter
 
Join Date: Nov 2009
Location: Kongsberg, Norway
Posts: 750
Default

Quote:
Originally Posted by andrius7 View Post
Hi all, just fitted new set on my fse, after a half hour of riding it startas to slip on 4,5,6 gears
Did you check the spring lengths? Perhaps they are worn?
__________________
Anders

"So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie)

2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper
2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper
1998 Bimota Supermono
1986 Duc Mille S2
1975 Guzzi sidecar hack
1961 Morini Corsaro 125
etc
Reply With Quote
  #3  
Old 06-07-2019, 05:57 AM
arminhammer arminhammer is offline
Senior Member
 
Join Date: Jun 2011
Posts: 184
Default

Too much fluid in the res.
Reply With Quote
  #4  
Old 06-07-2019, 08:40 AM
andrius7 andrius7 is offline
Member
 
Join Date: Feb 2019
Posts: 9
Default

Į left old springs, new ones are too long, but į might be wrong

Last edited by andrius7; 06-07-2019 at 09:30 AM.
Reply With Quote
  #5  
Old 06-08-2019, 02:00 AM
Gasser Nate's Avatar
Gasser Nate Gasser Nate is online now
Senior Member
 
Join Date: May 2010
Posts: 226
Default

Were they genuine plates? Did you measure the thickness of them? Did you pre soak them in oil before fitting as well?
__________________
Back on a gassy! 2018 EC300! 🤘
Reply With Quote
  #6  
Old 06-08-2019, 08:15 AM
andrius7 andrius7 is offline
Member
 
Join Date: Feb 2019
Posts: 9
Default

OK, problem solved, just tighten 3 springs
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Kickstart slipping. GGRider01 Enduro Engine - 2 stroke 11 01-27-2016 01:46 PM
DOT5 brake fluid in AJP cluch MC alecsstefan Enduro Engine - 2 stroke 12 05-25-2010 01:30 AM
Slipping kickstarter Warwick Simpson Enduro Engine - 2 stroke 10 07-11-2008 03:26 PM
Slipping clutch nitroman Enduro Engine 4 stroke (including EFI & Exhaust) 12 06-18-2008 08:14 AM




All times are GMT -5. The time now is 10:25 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org