What did you do to your Gas Gas today?

[Pepperami]

Heated up the air box with fan heater, worked a treat it was like jelly!

Finally got the forks back and everything put back together!

But it won't start!!!!

[Coop]

Originally Posted by Pepperami

But it won't start!!!!

What have you checked? Did you check for spark? Make sure it has fuel in it and the fuel tap is turned on? You didn't leave anything in the airbox did ya? Don't laugh, it happens.

[Pepperami]

Fuel is getting through, plug was wet and could smell it from exhaust! Tap is on I have a clear inline fuel filter. Anything in the air filter? What like next doors dog or something!

[bkwdc]

Gave her a bath, changed oil, wire tied throttle cable, installed rear tubliss and dunlop AT81 for HS Sunday.

[Preszo]

Moved my bike from the kitchen to the garage replaced front wheel bearings and pads. More to do over the weekend before getting her MOT.

[StuJohnson]

Originally Posted by Pepperami

Heated up the air box with fan heater, worked a treat it was like jelly!

Finally got the forks back and everything put back together!

But it won't start!!!!

The bike looks great!!!

Did you powder coat the frame? That white won't be white for too long....

[StuJohnson]

Started mine up after sitting for nearly 2 months. Lectron Carb did not fail me at all. 2 kicks on the choke and BBBRRRRRAAAAAPPPPPP!!!!!

But for some odd reason my headlight is not working.....???? Checked the switch all good. Confused.....

[pscook]

Originally Posted by StuJohnson

Started mine up after sitting for nearly 2 months. Lectron Carb did not fail me at all. 2 kicks on the choke and BBBRRRRRAAAAAPPPPPP!!!!!

But for some odd reason my headlight is not working.....???? Checked the switch all good. Confused.....

Light bulbs go bad quick. Mine failed during my last WV trip, noticed it half way through. Still has power, but the element broke. I'm waiting to see if I want to invest in the LED another forum member built.

Ninja edit: Where is the rod on your Lectron? My bike wouldn't start with the basic setting, so I can't tune it. If you can drop me a PM with your basic setting as a baseline I'd appreciate it.

[Jakobi]

Originally Posted by pscook

Light bulbs go bad quick. Mine failed during my last WV trip, noticed it half way through. Still has power, but the element broke. I'm waiting to see if I want to invest in the LED another forum member built.

Ninja edit: Where is the rod on your Lectron? My bike wouldn't start with the basic setting, so I can't tune it. If you can drop me a PM with your basic setting as a baseline I'd appreciate it.

Phil,

Start at 50mm from the bottom of the slide to the tip of the needle. That will have you close. I think mine settled at 50.25mm from memory. Singletrackers a little richer around 49.something mms.

[Coop]

Originally Posted by Pepperami

Fuel is getting through, plug was wet and could smell it from exhaust! Tap is on I have a clear inline fuel filter. Anything in the air filter? What like next doors dog or something!

When you pulled the plug did you verify spark?

I once left a rag stuffed in the intake after a project like yours. I have since learned it's pretty common lol.