GasGas Riders Club Forum  

Go Back   GasGas Riders Club Forum > GasGas Enduro Technical Forums > Enduro Intake/Carburetion - 2 stroke

Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 11-06-2017, 09:31 AM
Mud-Ectomy's Avatar
Mud-Ectomy Mud-Ectomy is offline
Member
 
Join Date: Oct 2008
Location: Vancouver Island, Canada
Posts: 53
Default 2018 Ec300 Jetting Specs

Does anyone have any solid Jetting specs for the 2018 EC 300
Sea level, Hard Enduro stuff. A wee bit on the rich side ok.
Cheers


__________________
2018 EC 300
Reply With Quote


  #2  
Old 11-06-2017, 01:05 PM
CDN Rick's Avatar
CDN Rick CDN Rick is offline
Silver Level Site Supporter
 
Join Date: Jul 2016
Location: Niagara, Ontario
Posts: 193
Default

Quote:
Originally Posted by Mud-Ectomy View Post
Does anyone have any solid Jetting specs for the 2018 EC 300
Sea level, Hard Enduro stuff. A wee bit on the rich side ok.
Cheers
IIRC I believe all dealers were sent info on this.
Otherwise I'm sure GGNA will have info for you. Try reaching out to them and I'm sure they will have a jetting table or better for you.
__________________
2012 GasGas EC300E
2016 Triumph Tiger 800 XCA
Reply With Quote
  #3  
Old 11-06-2017, 10:30 PM
Adrian200xc Adrian200xc is offline
Member
 
Join Date: Jun 2014
Location: Portland, Oregon
Posts: 37
Default

I went a clip leaner. It helped a lot. I was going to try a leaner pilot but I got a lectron instead.
Reply With Quote
  #4  
Old 12-04-2017, 12:26 PM
Andrea#92's Avatar
Andrea#92 Andrea#92 is offline
Member
 
Join Date: Feb 2012
Location: Monza, Italy
Posts: 12
Default

Quote:
Originally Posted by Mud-Ectomy View Post
Does anyone have any solid Jetting specs for the 2018 EC 300
Sea level, Hard Enduro stuff. A wee bit on the rich side ok.
Cheers
My 2018 EC 300 here in Italy run very good with N2ZG 2^ 42-178 (0-10 degrees, 200-1000 mt)
__________________
GasGas EC 300 2018
GasGas EC 300 2008
GasGas EC 300 2015
GasGas EC 300 2012
GasGas EC 125 2011
GasGas EC 125 2008

www.enduropuro.it
www.youtube.com/user/AndreaGasGas92/videos
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Revised Jetting Specs NEDW Jakobi Enduro Intake/Carburetion - 2 stroke 197 09-19-2014 09:17 AM
'06 EC300 stock handlebar specs? brider Enduro Chassis & Body 0 09-16-2013 04:08 PM
What is the stock 200 needle and jetting specs shaheeb Enduro Intake/Carburetion - 2 stroke 3 03-24-2012 11:56 PM
2010 EC300 Factory Jetting Specs - WTF? JP4 Enduro Intake/Carburetion - 2 stroke 197 07-04-2011 12:03 PM




All times are GMT -5. The time now is 02:23 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org