Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > Classified Advertisements > Parts

Parts New/Used Components and All Bike Part Outs


Reply
 
Thread Tools Display Modes
  #1  
Old 03-26-2016, 07:58 PM
Jakobi's Avatar
Jakobi Jakobi is offline
Super Moderator
 
Join Date: Oct 2010
Location: Australia
Posts: 7,994
Default 2010 Partial Part Out - Seeking interest

Hello everyone,

I'm having a bit of a spring clean and considering partially parting out my 2010 and keeping a few items as spares for my 13. Seeking interest to see if it'll be worth my while, given that I'm in Australia and postage will be up for people overseas. Our dollar is down at the moment which may negate some postage costs though.

I'd basically be looking at holding onto parts I can exchange between bikes, so the engine, reeds, wheels, and possibly forks and radiators.

In terms of what would be up for sale.
Near new plastics, 2011 Cervantez sticker kits.. Brand new headlight/shroud still not used.
Torn up seat, but have an as new gutz cover I'd be able to sell with it.
Fuel tank, small crack at upper mount. Not impacting seal of tank.
Pipe is a different fit so would be for sale. Could include P3 cover.
FMF Core Turbine II silencer. Needs a repack.
Ohlins 888 Shock
Ohlins TTX Shock
Linkages
Frame has seen some use
Triple clamps
Airbox, also seen some use. Pretty flogged out
PWK AS2 Carby
Swingarm
Brakes front and rear. Lines showing some wear. Bit of slop in rear caliper.
Plus all the other bits I've forgot.. airboot, electrics, switch blocks, subframe, etc. If there's anything in particular let me know.

Not sure what I'd even ask at this stage for the bits and pieces.


Reply With Quote


  #2  
Old 03-26-2016, 10:41 PM
frankinberg's Avatar
frankinberg frankinberg is offline
Platinum Level Site Supporter
 
Join Date: Jul 2012
Location: Brighton colorado
Posts: 264
Default

I would take the plastic and the ttx Shock let me know
Reply With Quote
  #3  
Old 03-27-2016, 12:57 AM
Jakobi's Avatar
Jakobi Jakobi is offline
Super Moderator
 
Join Date: Oct 2010
Location: Australia
Posts: 7,994
Default

Quote:
Originally Posted by frankinberg View Post
I would take the plastic and the ttx Shock let me know
If I can get enough interest to part out I'll let you know.. Otherwise may be interested in moving the TTX shock. I have 2 x springs available for it too 5.4kg/mm and 5.6kg/mm.
Reply With Quote
  #4  
Old 03-27-2016, 10:09 AM
MarkPhillips's Avatar
MarkPhillips MarkPhillips is offline
Member
 
Join Date: Apr 2015
Location: Ontario
Posts: 12
Default

If the plastics are spoken for, I'm interested in the pipe with P3 and the sticker kit, thanks! And maybe the kickstand, especially the bracket (I broke one this year already).
__________________
2011 GG EC300
1978 BMW R80
Reply With Quote
  #5  
Old 03-27-2016, 03:13 PM
frankinberg's Avatar
frankinberg frankinberg is offline
Platinum Level Site Supporter
 
Join Date: Jul 2012
Location: Brighton colorado
Posts: 264
Default

I guess I thought the Stiickers were on the plastic
Reply With Quote
  #6  
Old 03-27-2016, 03:46 PM
Jakobi's Avatar
Jakobi Jakobi is offline
Super Moderator
 
Join Date: Oct 2010
Location: Australia
Posts: 7,994
Default

Quote:
Originally Posted by frankinberg View Post
I guess I thought the Stiickers were on the plastic
They are
Reply With Quote
  #7  
Old 03-27-2016, 03:49 PM
Jakobi's Avatar
Jakobi Jakobi is offline
Super Moderator
 
Join Date: Oct 2010
Location: Australia
Posts: 7,994
Default

Remember I'm in Australia so the cost of sending large packages internationally could end up pushing the price well beyond what it's worth too.
Reply With Quote
  #8  
Old 03-27-2016, 06:22 PM
fullthrottle's Avatar
fullthrottle fullthrottle is offline
Senior Member
 
Join Date: Nov 2007
Location: South Australia
Posts: 174
Default

Is the seat a std one or tall?
Id be interested in seat and cover if its tall soft
__________________
06 EC250
Reply With Quote
  #9  
Old 03-27-2016, 10:56 PM
Jakobi's Avatar
Jakobi Jakobi is offline
Super Moderator
 
Join Date: Oct 2010
Location: Australia
Posts: 7,994
Default

Quote:
Originally Posted by fullthrottle View Post
Is the seat a std one or tall?
Id be interested in seat and cover if its tall soft
Standard height. Standard density. Foam supplied by gutz. Possibly a bit firmer than OEM. Still have the stock foam too. Both have worn some in the knee areas.
Reply With Quote
  #10  
Old 03-28-2016, 07:44 AM
phoenix's Avatar
phoenix phoenix is offline
Senior Member
 
Join Date: Aug 2012
Location: Oklahoma City, OK
Posts: 279
Default

I need a shift lever if you have one.
__________________
2009 Husqvarna TXC 450
2013 Husaberg TE 300
2014 Gas Gas XC 200

Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Any interest in the central midwest? Buysomerice Used Bikes 24 07-11-2016 07:40 AM
any interest in a plateable 04 ec300 want a 200/250 jt633 Used Bikes 10 08-20-2013 10:35 PM
2003 fse450sm. boging out at partial throttle bmxplus10 Enduro Engine 4 stroke (including EFI & Exhaust) 9 06-15-2010 04:09 PM
Interest in Barnett Clutch Baskets? eff Enduro Product Announcements 24 01-13-2010 10:09 AM




All times are GMT -5. The time now is 01:36 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org