|
Enduro Product Reviews Feedback & Comments on Products Tested |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Short clutch lever - magura type
Hello guys. Looking for some help. My 2012 ec200 has too long of a clutch lever for me. It's a Magura clutch. I've already used the search option and googled as well. I'm looking for options which won't cost $75 after I factor in the Canadian dollar and shipping. Are there any crossover brands which would fit the magura clutch and be shorter than my stock option? Cheers.
|
#2
|
||||
|
||||
KTMs use Magura and shorty levers are available for most if not all trials bikes. You could see if one of them uses Magura.
|
#3
|
|||
|
|||
Thanks.....I'll get ahold of the nearby KTM dealer.
|
#4
|
||||
|
||||
I have a 'shorty' Magura lever from MCS(motorcycle spares) that cost $15AU delivered! Not that much shorter than stock though but enough to clear handguards
|
#5
|
||||
|
||||
I have always hacksawed my levers to the length I prefer and file smooth. Why spend money unnecessarily.
|
#6
|
||||
|
||||
If you race, the ball at the end of the lever is required.
|
#7
|
||||
|
||||
Yes. You could weld it back in place as I previously did (and I don't race, just as a safety feature) and it still doesn't compare with the small shorty levers feel. I now use Offparts shorties but I have the AJP clutch, not sure if they make one for Magura.
__________________
'14 EC300 |
#8
|
||||
|
||||
I did not know that, although I don't race.
As far as safety goes I run full hand guards. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
13 300 magura lever crossover | BSM2 | Enduro Chassis & Body | 3 | 05-20-2015 02:22 AM |
Updating hyd clutch AJP to Magura??? | boardrider247 | Enduro Engine - 2 stroke | 8 | 05-30-2014 06:34 AM |
Magura clutch master (question) | Mick | Enduro Chassis & Body | 11 | 12-21-2013 05:35 PM |
2012 magura clutch lever | Diggs345 | Enduro Chassis & Body | 11 | 06-27-2013 01:30 PM |
short clutch lever | drn51 | Enduro Chassis & Body | 4 | 01-17-2012 02:33 AM |