GasGas Riders Club Forum  

Go Back   GasGas Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine - 2 stroke

Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 11-14-2009, 02:51 PM
eff's Avatar
eff eff is offline
Silver Level Site Supporter
 
Join Date: Jul 2006
Location: RI
Posts: 1,757
Default Clutch Basket Crossover

My clutch basket broke last weekend. I currently have a line on a used basket, but also want to look at all my options. Stock baskets are expensive and none in the US as far as I can tell.

Has anyone ever used a CR250 basket? I have heard rumors that they may work and was wondering if it was ture.

Thnks,

Ed


__________________
2004 GasGas DE250
Reply With Quote


  #2  
Old 11-14-2009, 03:43 PM
Cruiser Cruiser is offline
Senior Member
 
Join Date: Jul 2006
Location: Jim Thorpe Pa
Posts: 1,280
Default

I would also like to know,, my 97 gg has some time on it and the knotches are worn deep...
__________________
Steve
16 Beta 350rr
04 KTM 525 sx/exc gone
03 KTM 625 sxc-rehab unit-did its job and now gone
03 GG 250 ec-gone
97 GG 250 ec Gone
Reply With Quote
  #3  
Old 02-03-2010, 02:46 AM
Hamish Hamish is offline
Member
 
Join Date: Oct 2008
Location: Brisbane, Australia
Posts: 21
Default

off topic a little here, but does anyone know what other clutch plates (steels and fibres) will fit a 09 EC300R? Assume the R and std models have the same clutch
__________________


2007 Gas Gas EC300
2005 CRF450X
2006 WR290F Wandas Bike

2007 CRF280X Rebeccas Bike






Reply With Quote
  #4  
Old 02-03-2010, 05:11 PM
stainlesscycle's Avatar
stainlesscycle stainlesscycle is offline
Site Sponsor
 
Join Date: Jun 2009
Location: morgantown, wv
Posts: 1,608
Default

cr250 fibers will fit, but they are thicker than stock ones by at least .1 mm each.. i've not had a chance to get a set and mix and match and see if stack height is manageable..
Reply With Quote
  #5  
Old 02-06-2010, 02:03 PM
Hamish Hamish is offline
Member
 
Join Date: Oct 2008
Location: Brisbane, Australia
Posts: 21
Default

thanks for that, apparantly the cr250 steels fit, have a set of them on the way so will post up when I know the answer
__________________


2007 Gas Gas EC300
2005 CRF450X
2006 WR290F Wandas Bike

2007 CRF280X Rebeccas Bike






Reply With Quote
  #6  
Old 02-06-2010, 02:41 PM
stainlesscycle's Avatar
stainlesscycle stainlesscycle is offline
Site Sponsor
 
Join Date: Jun 2009
Location: morgantown, wv
Posts: 1,608
Default

if you can make cr250 steels and fibers work together and end up with a manageable stack height, that would be awesome.
Reply With Quote
  #7  
Old 02-15-2010, 01:10 PM
mxdj2003 mxdj2003 is offline
Senior Member
 
Join Date: Sep 2008
Location: spartanburg,sc
Posts: 108
Default

81 cr450 fibers are the same thickness, so are cb650 fibers
Reply With Quote
  #8  
Old 02-17-2010, 12:12 PM
Hamish Hamish is offline
Member
 
Join Date: Oct 2008
Location: Brisbane, Australia
Posts: 21
Default

cr250 steels also fit, but need aftermarket ones as stock ones are ally
__________________


2007 Gas Gas EC300
2005 CRF450X
2006 WR290F Wandas Bike

2007 CRF280X Rebeccas Bike






Reply With Quote
  #9  
Old 02-18-2010, 05:52 PM
stainlesscycle's Avatar
stainlesscycle stainlesscycle is offline
Site Sponsor
 
Join Date: Jun 2009
Location: morgantown, wv
Posts: 1,608
Default

i ordered a cr250 clutch kit - plates and steels - we'll see how it goes.
Reply With Quote
  #10  
Old 02-18-2010, 07:18 PM
Rick's Avatar
Rick Rick is offline
Senior Member
 
Join Date: Aug 2006
Location: Lodi, Ca
Posts: 1,932
Default

I replaced my fiber and steel plates 2 years ago. I ordered a Barnet kit from Go.Fasters...seems to be working just fine. The basket looked really good for it's age...
__________________
Rick
99 EC 200
06 RM 250
AMA D36
375X
OTHG
375S

***Thanks for the support : Twin Air /O'Neil Racing / Race 100% / Matrix Concepts / ODI / Mika Metals
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
clutch basket mod stainlesscycle Enduro Engine - 2 stroke 5 02-09-2010 10:12 AM
Clutch Basket jriley43 Enduro Engine - 2 stroke 2 03-10-2009 02:12 PM
125 clutch basket GasGas Enduro Engine - 2 stroke 1 09-08-2008 10:46 PM




All times are GMT -5. The time now is 02:07 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org