Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Intake/Carburetion - 2 stroke

Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 07-02-2022, 12:59 PM
jerseymike jerseymike is offline
Member
 
Join Date: Jun 2021
Location: New Philadelphia, OH
Posts: 54
Default Quick throttle bog

SO trying to get the carb set. WHen its running, all sounds/feels good. When blipping the throttle fast, getting a big bog. Have to roll throttle to avoid. Do i need bigger Pilot or move needle up 1? Have a 42 in there now and needle is middle, air screw is at 2 1/8 turns out.


__________________
03 EC250
Reply With Quote


  #2  
Old 07-03-2022, 07:57 AM
Zman's Avatar
Zman Zman is offline
Platinum Level Site Supporter
 
Join Date: Apr 2010
Location: Burbs of Chicago
Posts: 1,818
Default

I would try to richen the pilot first. If your bike is lean on the pilot, it is common that the idle screw is turned in too far to compensate which can raise the slide too far and also cause poor carburation at idle and a bog.
Reply With Quote
  #3  
Old 07-03-2022, 03:24 PM
(F5)'s Avatar
(F5) (F5) is offline
Gold Level Site Supporter
 
Join Date: Jul 2006
Location: Wellington New Zealand
Posts: 2,063
Default

Obviously check pilot jet and cct is clear. Old petrol guns things up.
__________________
'07 EC300 GG
'14 TXT250 GG
'? 496 CPI Cheetah RZ/RGV hybrid
'22 765 Street Triple RS
'21 XTrainer
'69 Stinger T125 Suzuki
'23 TRS 250RR (it's a Trials thing)
Reply With Quote
  #4  
Old 07-04-2022, 06:47 AM
ditezz ditezz is offline
Member
 
Join Date: Apr 2010
Posts: 76
Default

The air screw turned out over two turns would suggest the pilot is too rich .Has it always done this or has it just developed?If it has just developed look for something that has changed .Dont start changing jets
A pwk carb with a worn out jet block O ring may cause it to bog.
If it has always bogged ,try a 40 pilot ,air screw 11/2 turns ,raise the needle a notch .Do one change at a time ,then try it .Good luck
Reply With Quote
  #5  
Old 07-04-2022, 06:51 AM
ditezz ditezz is offline
Member
 
Join Date: Apr 2010
Posts: 76
Default

Sorry ,Thats lower the needle by moving the clip up on notch
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Quick throttle Todd5774 Enduro Intake/Carburetion - 2 stroke 7 03-22-2015 06:16 PM
G2 Quick Throttle erniebearskin Enduro Other... 26 01-16-2013 12:16 PM
I need help QUICK!!!! bukwheat General Discussions & Announcements 15 12-23-2011 07:41 PM
quick vid fullthrottle Pictures & Videos 0 06-24-2010 11:57 PM




All times are GMT -5. The time now is 09:09 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org