|
Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
power valve 2006 on 2013 cylinder
has somebody used a the power valve system from 2006 on the 2013.
i bought a athena cylinder for 2013-2015 and thought that it was possible to put in the 2006 powervalve. but now i see that its not possible because it doesnt open all the was and hits the cover when its fully opened. i thinking of make an spacer so the power valves can go out longer and cut a little where the axis goes so the powervalves is able to open all the way somebody done this? |
#2
|
||||
|
||||
No, but you're about to become the expert on this.
Look at parts diagram, you can find despice (part files) for different years. To work the valve needs to be, at least closeish, to the piston .
__________________
'07 EC300 GG '14 TXT250 GG '? 496 CPI Cheetah RZ/RGV hybrid '22 765 Street Triple RS '21 XTrainer '69 Stinger T125 Suzuki '23 TRS 250RR (it's a Trials thing) |
#3
|
||||
|
||||
I have ground the old power valve flapper to get rid of the bump and allow for more flow. The old valve flapper and pivot are very similar and I think the same as 1994-1996 Honda CR250.
|
Tags |
ec 125, ec125, power valve |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
power valve ec 125 2013 | eranmu | Enduro Engine - 2 stroke | 6 | 04-19-2017 07:08 AM |
Power Valve ? | BigAl | Enduro Engine - 2 stroke | 4 | 01-05-2015 09:08 PM |
S3 cylinder/power valve help? | '11EC300 | Enduro Engine - 2 stroke | 7 | 06-02-2014 08:18 PM |
Loss of power - suspect power valve | Jonny Halls | Enduro Engine - 2 stroke | 4 | 01-22-2013 09:56 AM |
power valve nut | bonkeye | Enduro Engine - 2 stroke | 4 | 10-11-2012 06:40 PM |