|
Enduro Electrical & Wiring Lighting, Ignition, Wiring, Plugs, etc. |
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Lights controll Estart - vs Non-Estart loom
Just saw an add here, with a person selling a Light controll for Estart loom.
I dont have Estart, dont need it, neither want it, but do need a new Light controll. Anyone here knows if the lights controll for Estart fits the non-E-start loom? Links; Estart controll: http://www.motocrosscenter.com/ecomm...ducts_id=12876 Loom http://www.motocrosscenter.com/ecomm...oducts_id=3511
__________________
07` EC300SM. 09` KTM 250EXC. 70`CB350 |
#2
|
|||
|
|||
Email them and ask, I found them very easy to deal with.
|
#3
|
||||
|
||||
It don't know if it will fit the standard loom, but I know the functions of the switch:
Start Horn Kill And the rotating knob selects running lights (tail and small headlight bulb), low beam, or high beam lights. You can modify the wiring/plug to fit anything, and the one leftover button will be the start, but you will have functions for everything else. It would just be a matter of incorporating the new switch into the existing wire harness, which I would have to leave to the wiring experts here.
__________________
Phil (New bike pending...) |
#4
|
|||
|
|||
I would avoid the stock cluster switch because the rotary dial for the lights is very flimsy and easily broken.
Look for something like this: http://sicassracing.com/store/switch...ion_bar_switch
__________________
2011 EC250E |
#5
|
|||
|
|||
Quote:
__________________
07` EC300SM. 09` KTM 250EXC. 70`CB350 |
#6
|
|||
|
|||
No, it has a bundle of wires exiting the switch which you have to connect up yourself. For truly plug and pray, you would need the stock items.
Just remember to be gentle with the rotating dial and you will be OK. The internal sleeve breaks when you turn it hard against the stops.
__________________
2011 EC250E |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
2011 estart system | roverhybrids | Parts | 2 | 11-08-2013 09:19 AM |
what is eta of 300 estart | nmrider | General Discussions & Announcements | 87 | 05-11-2012 03:10 PM |
Estart setup | Neil E. | Enduro Electrical & Wiring | 5 | 06-26-2011 04:25 PM |
A Shout out to eStart | twowheels | General Discussions & Announcements | 5 | 04-19-2010 07:34 AM |