|
Enduro Suspension Tuning & maintenance of Enduro forks, shocks, etc |
|
Thread Tools | Display Modes |
#11
|
|||
|
|||
Quote:
I have the new stack from racetech and will put it up in a few minutes
__________________
2003 txt250 Pro 2013 Ossa 280i |
#12
|
|||
|
|||
Quote:
so prize (of pride!) goes to webmaster for being the closes, anyone care to comment on if this new stack is equivalent or will give a different ride to the original stack? just seen another typo low speed comp should be (6).20x44
__________________
2003 txt250 Pro 2013 Ossa 280i |
#13
|
|||
|
|||
I have decided to revive this thread.
I have realized that i am currently running my shock with HS comp all the way out (and i think it could come out a bit more for the rocky riding i do) My plan is to do some changes, but not sure if i am doing enough or too much. I basically want to revalve the comp so that I will have similar HS comp that i have now but will be in the middle of the clickers thoughts were to change the LS stack to5 and HS stack replace the first 3 HS shims with .20 shims like so: existing New (6).20x44 (5).20x44 .15x32 .15x32 .25x44 .20x44 .25x42 .20x42 .25x40 .20x40 .25x38 .25x38 .25x36 .25x36 .25x34 .25x34 .25x32 .25x32 .25x30 .25x30 .25x28 .25x28 .25x26 .25x26 .25x24 .25x24 .25x22 .25x22 .25x20 .25x20 Any comments? (PS i am too lazy to keep opening up the shock and changing things so only want to do this once, but a bit worried that dropping one of the LS shims may be too much)
__________________
2003 txt250 Pro 2013 Ossa 280i |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Suspension gurus please help | stemplin | Enduro Suspension | 10 | 12-09-2011 02:33 PM |
ECU gurus??? | BigChina | Enduro Engine 4 stroke (including EFI & Exhaust) | 2 | 05-20-2011 11:40 AM |
Need some help from the jetting gurus | MattR | Enduro Intake/Carburetion - 2 stroke | 7 | 01-29-2008 01:55 PM |