|
Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
05 to 07 subframe conversion
Im in the middle of doing this myself but would appreciate anyone who's done it before giving me a bit of input.
The new subframe needs 'pulling in' on the lower mounts for it to fit the frame mounts, or it wants to sit on the outide of the RH one where the rear brake is. I can squeeze it in to fit but then it pops off the airbox front cover (dry assembled, not rivetted or sealed up yet). With it 'squeezed' in as said, the back end lines up perfectly with the rear fender and mudguard in place. The frame mounts don't look bent on the lowers. The top were slightly, but now they're straight as a die. This is the reason I went for the conversion. A throttle that kept sticking WFO at a recent H&H meant I flipped it 6 times. One broken seat and fender, and a subframe that's 'S' shaped. |
#2
|
||||
|
||||
Thats the way they are, including my '07. Put the airbox together and try it.
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
250 to 300 Conversion | Kurdt | Enduro Engine - 2 stroke | 10 | 03-30-2010 09:41 AM |
ec 125 conversion? | eddy field1 | Enduro Chassis & Body | 1 | 09-03-2009 09:00 PM |
07 200 to 05 conversion | brains | Enduro Engine - 2 stroke | 5 | 07-12-2009 12:54 AM |
MY FSE 450 to SM conversion | cal_tony | Pictures & Videos | 11 | 02-05-2009 10:11 AM |
Subframe conversion--what parts are needed | Ryno | Enduro Chassis & Body | 3 | 01-10-2008 05:01 PM |