Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Intake/Carburetion - 2 stroke

Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 02-27-2019, 05:51 AM
SimonGill SimonGill is offline
Member
 
Join Date: Feb 2019
Posts: 3
Default Jetting issues resolved!!!!! EC 300

2015 EC 300 Racing
175 MJ
42 Pilot
Hi all, I've spent days reading on here and messing with jets to try to get my bike running properly, but there are no definitive answers, this needle, that jet, float height, bad idle etc.
Well something that may be overlooked, I did..!!

My bike has the cable operated choke, its shit!
I noticed it wasn't seating fully, so put a pipe on the inlet and blew to see if it sealed, it didn't.

Long story short, disconnected choke, bike runs best I've ever had it!!
Now I get to fine tune jetting a bit, but it ticks over with screw quite far out, pulls instantly and cleanly everywhere, still an animal on the top end but heaps more torque low down than before..

Hope this helps someone


Reply With Quote


  #2  
Old 02-27-2019, 10:17 AM
Davehuge's Avatar
Davehuge Davehuge is offline
Senior Member
 
Join Date: May 2017
Location: English but now based in South of France.
Posts: 470
Default

Great, sounds like you're well on the way to sorting out your carb.

Maybe you already know...you can replace your cable operated choke with a simple plunger like this...

Choke.jpg

All the best, Dave.
Reply With Quote
  #3  
Old 02-27-2019, 03:33 PM
SimonGill SimonGill is offline
Member
 
Join Date: Feb 2019
Posts: 3
Default

Quote:
Originally Posted by Davehuge View Post
Great, sounds like you're well on the way to sorting out your carb.

Maybe you already know...you can replace your cable operated choke with a simple plunger like this...

Attachment 8128

All the best, Dave.
Already have one on order, thanks
Reply With Quote
  #4  
Old 02-27-2019, 06:46 PM
(F5)'s Avatar
(F5) (F5) is offline
Gold Level Site Supporter
 
Join Date: Jul 2006
Location: Wellington New Zealand
Posts: 2,062
Default

A mate did the same on his 15ish 300. Shame as since putting the 17 carb on mine I have this bare cable by the clutch I can pull with gloved hands and it's fabulous for a simple man like me I think I'm all posh like.

Have considered getting a lever as well but I'd be so far above my station I'd probably start abusing the staff.

I don't think I would like to be that person.
__________________
'07 EC300 GG
'14 TXT250 GG
'? 496 CPI Cheetah RZ/RGV hybrid
'22 765 Street Triple RS
'21 XTrainer
'69 Stinger T125 Suzuki
'23 TRS 250RR (it's a Trials thing)
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Changed Jetting now having issues icebergstu Enduro Intake/Carburetion - 2 stroke 17 09-29-2018 01:23 AM
maybe this is the cause of my issues? OMG husley Enduro Engine - 2 stroke 29 09-11-2016 06:47 AM
2002 Gas Gas EC300 Jetting Issues Vergey Enduro Intake/Carburetion - 2 stroke 13 10-28-2014 04:31 AM
02 450 FSE issues wakeymatt Enduro Engine 4 stroke (including EFI & Exhaust) 12 08-20-2012 02:33 PM
PWK replacement resolve idle, jetting issues? socalscott Enduro Engine - 2 stroke 2 01-04-2010 12:32 PM




All times are GMT -5. The time now is 02:35 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org