|
Enduro Suspension Tuning & maintenance of Enduro forks, shocks, etc |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Ohlins shock shim stack
Anyone have the stacks from ohlins shocks at all? Preferably 2006? Cheers!
__________________
2006 EC300 Enduro - Ignitech CDI - 38/NECW#2/165 FMF gnarly, FMF shorty, .50 front 5.7 rear 2016 RM-Z450 |
#2
|
||||
|
||||
I do! Remind me and I'll get em to you!
|
#3
|
|||
|
|||
Reminded!
__________________
2006 EC300 Enduro - Ignitech CDI - 38/NECW#2/165 FMF gnarly, FMF shorty, .50 front 5.7 rear 2016 RM-Z450 |
#4
|
||||
|
||||
Compression
520-40 (10x) 610-34 1115-30 520-40 (3x) 525-38 525-36 525-34 520-32 520-30 520-28 520-26 530-22 (2x) Rebound 520-36 (5x) 1115-28 525-36 525-34 525-32 530-30 530-28 530-26 530-25 530-24 530-23 530-22 610 = .10mm 1115 = .15mm 520 = .20mm 525 = .25mm 530 = .30mm Stock stacks for 06-10 ... I have the stock stacks out of my 2010/11 888 shock as well.. I'll post them below. |
#5
|
||||
|
||||
2010 Euro / 2011 Stock stacks, as pulled down.
Compression 40 0.2 40 0.2 40 0.2 40 0.2 40 0.2 40 0.2 40 0.2 40 0.2 40 0.2 40 0.2 34 0.1 30 0.15 40 0.2 38 0.2 36 0.2 34 0.2 32 0.2 30 0.2 28 0.2 25 0.2 22 0.2 19 0.2 37 4 Rebound 36 0.2 36 0.2 36 0.2 36 0.2 36 0.2 36 0.2 36 0.2 28 0.15 36 0.3 34 0.3 32 0.3 30 0.25 28 0.25 26 0.25 24 0.25 22 0.25 30 3 |
#6
|
|||
|
|||
interesting jake after a shit month since 6 of my bikes were stolen iv had to jump back on the 05 250 forgot how good the 45 mar 888 ohlins work in the woods and how light the 05 rides to my 013 300 and the 018 300 i had a long ride on any way back to the 05 did the linkage change from 05 to 011 as im thinking of updating the 05 to 011 valving thanks robin
|
#7
|
|||
|
|||
Does this look right to everyone? Can't tell what the red bits are and do? I have an older shock that doesn't have them, any ideas?
__________________
2006 EC300 Enduro - Ignitech CDI - 38/NECW#2/165 FMF gnarly, FMF shorty, .50 front 5.7 rear 2016 RM-Z450 |
#8
|
|||
|
|||
Shock without them
__________________
2006 EC300 Enduro - Ignitech CDI - 38/NECW#2/165 FMF gnarly, FMF shorty, .50 front 5.7 rear 2016 RM-Z450 |
#9
|
|||
|
|||
Had a good look about, and basically the shock has been lowered... Wow. I can find the washers online and they appear to be racetech, but there is an aluminium but under that which I can't find in any lowering kits, and is not there on my spare shock so I've taken out of, any idea where there come from?
I can't believe I've had this bike 7 years and not known it's been lowered...
__________________
2006 EC300 Enduro - Ignitech CDI - 38/NECW#2/165 FMF gnarly, FMF shorty, .50 front 5.7 rear 2016 RM-Z450 Last edited by motopsycho87; 04-13-2019 at 02:39 PM. |
#10
|
|||
|
|||
whats the centre to centre length of the shock iv got the ohlins dater sheet for 05 and 06 the red spacers look ohlins
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Where to buy Ohlins shock parts (2012 Ohlins 888) | CDBiker220 | Enduro Suspension | 2 | 04-22-2017 07:02 AM |
Shim stack for woods racing 45 marzocchis | sam097 | Enduro Suspension | 3 | 03-06-2017 10:09 AM |
Marzocchi 48 shim stack profile. | Barbs | Enduro Suspension | 17 | 02-29-2016 07:12 AM |
2012 Ohlins lower shock bushing and Problem with shock. | CDBiker220 | Enduro Suspension | 1 | 08-04-2014 09:35 PM |
2011 300 xc Ohlins shock shim stack | BrentMartell | Enduro Suspension | 6 | 04-12-2012 09:51 AM |