Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Chassis & Body

Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing.


Reply
 
Thread Tools Display Modes
  #11  
Old 12-08-2009, 07:22 AM
stainlesscycle's Avatar
stainlesscycle stainlesscycle is offline
Site Sponsor
 
Join Date: Jun 2009
Location: morgantown, wv
Posts: 1,608
Default

Bike year:2000
model:ec200
mods: pv cover, jet kit, 8oz fww, doma pipe,tc2 silencer
Gearing:13/52
Top speed:68ish on gps. i'm rarely above 30.
what kind of ridding do you do:tight woods, hare scrambles, enduros

Result:works well for my purposes. suspension is the best. i'm in 2nd and 3rd most of the time. no need for top speed - i'm usually in 6th for under 5 minutes total in a 2hr race. i do 30+ tight rocky/rooty single track harescrambles a year and need this gearing primarily for hill climbing..and to get killer starts.. i am now regularly top 3 into the woods! if i could just get the other hour and 59 minutes figured out i'd be a contender



Last edited by stainlesscycle; 06-02-2010 at 06:09 PM.
Reply With Quote


  #12  
Old 12-08-2009, 04:36 PM
Rick's Avatar
Rick Rick is offline
Senior Member
 
Join Date: Aug 2006
Location: Lodi, Ca
Posts: 1,930
Post

Bike Year:1999
Model:EC 200
Mods: Jet Kit, Head Squish, Mecciso Pipe, just a tad taken out of the head pipe w/ FMF S/A T.C II, Boysen Carbon Power Reeds. Swapped out the 45mm Zokes for 43 WP's
Gearing:13/52
Top speed:60+

What kind of ridding do you do:tight woods, hare scrambles, enduros

Result:Motor/suspension is awesome for tight stuff...Runs like a 200 on steroids. I have tried 13/51, went back to 13/52 for second, thrid and fourth gear for grunt work! Got'ta love that six speed
__________________
Rick
99 EC 200
06 RM 250
AMA D36
375X
OTHG
375S

***Thanks for the support : Twin Air /O'Neil Racing / Race 100% / Matrix Concepts / ODI / Mika Metals

Last edited by Rick; 12-08-2009 at 04:36 PM. Reason: opps
Reply With Quote
  #13  
Old 12-16-2009, 07:40 AM
sierrarider's Avatar
sierrarider sierrarider is offline
Senior Member
 
Join Date: Nov 2007
Location: Carson City, NV
Posts: 123
Default

Bike Year:2005
Model:300 DE
Mods: RB carb and head mod, G2 throttle cam, suspension by Trailtricks
Gearing:13/47 for desert, switching to 13/49 for enduro

What kind of riding do you do?:tight woods, hare scrambles, enduros

Result:13/47 is a little tall but works fine unless moving very slow, 13/49 provides more of a "granny" gear. My suspension is excellent for all speeds but optimized for a faster pace.
__________________
Jon
'05 GG 300 DE (race bike)
'06 KTM 450 XC (dual sport & supermoto)
'09 GG 280 TXT (to learn on)
'02 BMW R1150RT (for racking up the miles)
Four wheels move the body, two wheels move the soul
If everything seems under control, you're not going fast enough
Reply With Quote
  #14  
Old 04-30-2012, 05:30 AM
a c t i v e X a c t i v e X is offline
Member
 
Join Date: Dec 2011
Location: Israel
Posts: 31
Default

Bike year: 2011
model: EC250E
mods: carb tuning only
Gearing: 13:48 (standard)
Top speed: ~140 as i've seen
what kind of ridding do you do: mostly tight, rocks, woods. in the winter dunes and open desert

Result: pretty good, may try 13:50- for the rocks. carb jetting with 'rain' map provides good response and nice boost in low RPM
__________________

---------------
GG EC250E 2011
KTM EXC250 2009
YAMAHA WR250F 2007
YAMAHA WR250F 2003
KTM 520 EXC 2001
KTM 620 EGS 1997
HONDA XR600R 1997
SUZUKI DR 350S 1992

Last edited by a c t i v e X; 05-01-2012 at 08:21 AM.
Reply With Quote
  #15  
Old 05-01-2012, 07:02 AM
rosco's Avatar
rosco rosco is offline
Site Sponsor
 
Join Date: Nov 2010
Location: Rapid City, S.D.
Posts: 314
Default

2011 XC250-E, skinny base gskt.
175 main, N3EW needle 2nd clip position, 42 pilot
13:52 gearing
81 mph pinned down a gravel road, runs clean from top to bottom.
I've honestly never pushed an engine as hard as I did this one.
__________________
Rosco's Motorcycle and ATV
Rapid City, South Dakota
www.roscosmotorcycle.com


Reply With Quote
  #16  
Old 06-25-2013, 05:16 PM
Jiikoo811 Jiikoo811 is offline
Member
 
Join Date: Nov 2009
Posts: 82
Default

2008 300ec
Gearing: 13-44
Jetting: 178/45 stock needle 2nd clip
Doma pipe and muffler
S3 head
Oversize PV-cover
87mph gps

Not perfect gearing in tight places but good in mx track and trail riding with long distances

Sent from Razr MAXX
__________________
plated 300EC 2008
Reply With Quote
  #17  
Old 03-01-2014, 02:45 PM
jt633 jt633 is offline
Senior Member
 
Join Date: Feb 2013
Location: bridgeville,pa
Posts: 158
Default

Year : 2004
De converted ec300
Gearing: 13/50
Top speed: never tested assuming 50ish
Riding: single track, xc racing, tough terrain, big hillclimb
Mods: powervalve cover, fmf fatty/ turbinecore2, 2k3 ignition and all chassis armor and goodies

My gearing setup is about as perfect as it can get for a novice intermediate rider. It tracts awesome everywhere even with a bald tire and can lug it super low my only reason to change would be to go down to a 48 to try to see if i could ride the bike more aggressively but the bottom end the bike has now is just incredible almost like a trials bike!
__________________
2004 ec 300
Reply With Quote
  #18  
Old 03-01-2014, 03:36 PM
thejackrabbit thejackrabbit is offline
Senior Member
 
Join Date: Sep 2013
Location: Western PA
Posts: 162
Default

Bike year: 2006
model: DE/EC 200
Jetting: 178/42. NEsomething? the suzuki needle at #3. 5 slide ground to a 6
mods: LTR PV cover, cleaned up ports on cylinder, psr-21 reeds, fmf gnarly, Q stealth
Gearing: 12/48 with renthal non o-ring chain
Top speed: faster than 60? not a big deal to me
what kind of ridding do you do:tight woods, single track, stop and start because of losing the trail

Result: the 12 tooth front sprocket has shown signs of bending teeth way before the rear sprocket or chain wearing out, will go for a 13/51 or 52 when I change sprockets and chain
__________________
Jack - western PA
2006 KTM 250 sx
2006 EC 200/ 11' style kit--GONE
2004 200 EXC
1997 KDX 220
2004 CRF 250X
1974 CL125
www.youtube.com/allthatstuff35 <---some gasgas videos here
Reply With Quote
  #19  
Old 04-14-2014, 03:36 AM
iconic iconic is offline
Member
 
Join Date: May 2008
Posts: 9
Default Ec250 2008

Bike year: 2008
model: EC250
mods: Gnarly pipe
Gearing: 13/51
Top speed:..I've got a GSXR for top speed!
what kind of ridding do you do: enduro, woods stuff, gentle trail.

Result: seems fine to me, good low granny trials gear, top is high enough, she came with 13-47 which would of been great for motorway or pizza delivery work!

I did once have a EC-200 that came with a 13/45 on it....must of been a good story there?
__________________
Banham, Norfolk, England
EC250 2008 zokes n ohlins....ohh and an EC200 '06 and another EC200 on the '07 before that!

Beta REV3 250
Zook GSXR-750 SRAD
Reply With Quote
  #20  
Old 06-14-2014, 06:13 PM
robszombie's Avatar
robszombie robszombie is offline
Member
 
Join Date: May 2009
Location: Meath, Ireland
Posts: 71
Default

Bike year: 2012.
model: EC250-e.
mods: Rad braces.
Gearing: 13/52.
Top speed: ???
what kind of ridding do you do: Woods, slow stuff mainly.

Question: with the current gearing the chain has eaten through the chain guide, will a TM designs (they say up to 3t extra) fit it &/or do I need to revert back to a 50 & possibly fit a 12t on the front for the same effect?

Robs.
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
The Tire Thread - Please add your information noobi Enduro Chassis & Body 37 07-26-2021 12:17 AM
Looking for information to split case RayGas Enduro Engine - 2 stroke 2 05-26-2008 08:15 PM
Information please NewB GasGas Member Polls 3 10-25-2007 09:36 PM
2007 Model Information jeffd General Discussions & Announcements 8 08-27-2006 01:52 PM
FAQ Information Needed.... webmaster General Discussions & Announcements 0 08-02-2006 11:28 AM




All times are GMT -5. The time now is 03:28 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org