Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Chassis & Body

Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing.


Reply
 
Thread Tools Display Modes
  #1  
Old 08-30-2013, 12:59 PM
motopsycho87 motopsycho87 is offline
Senior Member
 
Join Date: Jun 2013
Location: Suffolk, UK
Posts: 905
Default Rear wheel and Sprocket interchange?

Hi guys, can anyone tell me

1 - what wheels fit the ec300 (2006)

2 - what other bikes share the same size rear sprocket?

3 - will a 14 tooth front sprocket fit?


Thanks!!!


Reply With Quote


  #2  
Old 08-30-2013, 03:19 PM
GasGas's Avatar
GasGas GasGas is offline
Senior Member
 
Join Date: Aug 2007
Location: Nova Scotia, Canada
Posts: 694
Default

The rear sprockets are the same as Husqvarna sprockets. The front is GasGas only. The wheels are gasgas only as far as I know. Not too hard to find some part out wheels usually. The older u rims are the best in my opinion. There is aftermarket wheels available too.
__________________
2018 EC 300
Reply With Quote
  #3  
Old 08-30-2013, 04:18 PM
gasser's Avatar
gasser gasser is offline
Senior Member
 
Join Date: Nov 2006
Location: Cookeville, TN
Posts: 1,458
Default

My friend has a KX rear wheel on his 01 300 gasser so it fit with probably only spacer modifications. Rims are not interchangeable because GG USES A DIFFERENT LACING PATTERN than any major factory uses so the holes in the rim are drilled at different angles than you find on rims made for "the big five".
As for rear sprockets the 91-93 Suzuki 250 (and 350 I think) DR"S" is the same but the non "S" is not. For example the 91 250 DR"S" fits but the 91 250 DR does not. That kind of crap is why I don't own a Jap bike anymore.
Reply With Quote
  #4  
Old 08-31-2013, 02:13 AM
TheLetterJ's Avatar
TheLetterJ TheLetterJ is offline
Senior Member
 
Join Date: May 2013
Location: Santa Maria, CA USA
Posts: 185
Default

I have a late 90's KX250 wheel and a late 90's KDX200 wheel that both are almost a direct bolt on (rotor too!) to my '01 EC300. The brake side wheel spacer from the Kawi's is too narrow, but a couple big washers from the hardware store solved that.
Reply With Quote
  #5  
Old 08-31-2013, 04:00 AM
bowhunter007's Avatar
bowhunter007 bowhunter007 is offline
Senior Member
 
Join Date: Mar 2012
Location: Tacoma, Washington
Posts: 976
Default

Quote:
Originally Posted by TheLetterJ View Post
I have a late 90's KX250 wheel and a late 90's KDX200 wheel that both are almost a direct bolt on (rotor too!) to my '01 EC300. The brake side wheel spacer from the Kawi's is too narrow, but a couple big washers from the hardware store solved that.
I use a wheel from a 95 KX250(KX spacers as well), on my 01 XC250. Also used a couple big washers.
__________________
All healed up, and ready to burn some fat.
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Help! Wheel interchange info '05 DE300 DBR0051 General Discussions & Announcements 1 06-27-2009 10:02 AM
Rear sprocket steve Enduro Chassis & Body 7 01-22-2009 07:38 AM
SM ing With MY 36t Rear Sprocket. cal_tony Enduro Chassis & Body 1 12-30-2008 11:39 AM




All times are GMT -5. The time now is 12:22 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org