#1461
|
||||
|
||||
When racing on Sunday, I noticed some clutch slipping, in places where it shouldn't slip. The clutch is a Rekluse Core EXP 3.0, so some slipping is to be expected
When I got home, I disassembled it to measure the discs. They measured OK, but then I noticed two hairline cracks in the Rekluse friction disk. I have searced the 'net and spare parts seems to be readily available, so I asked my Norwegian Gasgas importer if he can get me the parts. I hope to have them in a week's time. While I had it apart, I also installed the Rekluse brake pedal tip.
__________________
Anders "So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie) 2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper 2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper 1998 Bimota Supermono 1986 Duc Mille S2 1975 Guzzi sidecar hack 1961 Morini Corsaro 125 etc Last edited by Anders; 02-11-2020 at 06:04 AM. |
#1462
|
||||
|
||||
The Rekluse ring was broken
I picked up the Rekluse parts from my dealer and mounted it all together, adjusted and tested. And then I put on a new seat cover.
__________________
Anders "So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie) 2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper 2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper 1998 Bimota Supermono 1986 Duc Mille S2 1975 Guzzi sidecar hack 1961 Morini Corsaro 125 etc Last edited by Anders; 02-16-2020 at 02:10 PM. Reason: Added a picture |
#1463
|
||||
|
||||
What I did on my GasGas.
Yesterday (my Sunday) trail ride: 1. Pulled a skilled and very stylish wheelie passing someone up a steep hill. 2. Immediately as it came down I had another bite of the cherry and with inverse relationship of skill and style, very nearly flipped that puppy, closest I've ever been and too dim witted to try reach the rear brake, got through on luck alone. Fortunately I didn't know the witness.
__________________
'07 EC300 GG '14 TXT250 GG '? 496 CPI Cheetah RZ/RGV hybrid '22 765 Street Triple RS '21 XTrainer '69 Stinger T125 Suzuki '23 TRS 250RR (it's a Trials thing) |
#1464
|
|||
|
|||
Quote:
__________________
2003 txt250 Pro 2013 Ossa 280i |
#1465
|
||||
|
||||
Quote:
|
#1466
|
||||
|
||||
I will check and post it here, but it may take a day or two.
__________________
Anders "So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie) 2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper 2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper 1998 Bimota Supermono 1986 Duc Mille S2 1975 Guzzi sidecar hack 1961 Morini Corsaro 125 etc |
#1467
|
||||
|
||||
Quote:
https://motocentergasgas.com/shop?ke...ardware&page=2 |
#1468
|
|||
|
|||
If you buy the rekluse clutch cover (recommended..oem is thin) you get the brake pedal as well.
|
#1469
|
||||
|
||||
Quote:
Here, I have placed the OEM tip on top of the Rekluse to see the difference in height and width. The same setup, seen from above. Sorry for the out of focus image. Part number
__________________
Anders "So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie) 2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper 2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper 1998 Bimota Supermono 1986 Duc Mille S2 1975 Guzzi sidecar hack 1961 Morini Corsaro 125 etc |
#1470
|
||||
|
||||
Quote:
Quote:
^^^^Thanks Gents |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
DNF today | Pepperami | Enduro Chassis & Body | 6 | 09-18-2013 11:59 AM |
Got my first GG today! | RonMexico | General Discussions & Announcements | 6 | 02-19-2011 12:39 PM |
Went Riding Today and..... | coolum74 | Enduro Engine 4 stroke (including EFI & Exhaust) | 2 | 11-30-2008 01:12 PM |
HELP! I tried to use my gasgas as a jet ski today! | sammyj18 | General Discussions & Announcements | 19 | 11-21-2008 08:01 PM |
SHNF From Today | Boomhauer | Pictures & Videos | 13 | 10-30-2007 04:18 PM |