Vapour trail tech power?

[Wilksiee]

why not make a video about it haha!!

http://www.youtube.com/watch?v=pOSlYnKdbUY

[Jakobi]

LOL.. You got a fast one!

[ditezz]

TO FIND YOUR WHEEL DIAMETER MARK THE TYRE AND THEN THE FLOOR WITH CHALK ,PUSH THE BIKE ALONG SO THE WHEEL DOES ONE REVOLUTION AND MARK THE FLOOR AGAIN .MEASURE BETWEEN THE TWO CHALK MARKS ON THE FLOOR IN mm.THAT WILL BE THE NUMBER YOU PUT INTO YOUR STEALTH UNIT.iTS ABOUT 2015 from memory.
As far as connecting the power use the yellow wire from the headlight and the black (Earth).Its the regulated 12v from the stator.I soldered a Diode in series on the yellow as a simple half wave rectifier to supply a DC supply.Prior to that the random AC would cause the thing to reset all the time.The back light will also work as well as the Accumulated ride time (ART).The little 3v internal battery is still imperative for proper operation. By the way ,Im talking about a stealth speedo on a 09 ec 300.

sorry about the upper case...fucking caps lock lol

[gassergrant]

Hi gents just fitted my vapor to day on my ec300 03 every thing is working but the rev counter is going mental, ive run the red to the yellow live for the lights before the switches and the earth black to the black earth for the lights, for the moment i have unplugged it and its working as it should.
i also would like to no some info on my bike
rev limit
running temp
boil over point and any thing else i need as i just put random numbers in for now.
soz i did put this in a thread but done it from my phone in a rush, oh and one final thing what hose did you cut for the temp gauge

thanks grant