#11
|
||||
|
||||
Quote:
carb vent line doesn't vent to the clutch master cylinder.......
__________________
Rick 99 EC 200 06 RM 250 AMA D36 375X OTHG 375S ***Thanks for the support : Twin Air /O'Neil Racing / Race 100% / Matrix Concepts / ODI / Mika Metals |
#12
|
||||
|
||||
Quote:
__________________
Rick 99 EC 200 06 RM 250 AMA D36 375X OTHG 375S ***Thanks for the support : Twin Air /O'Neil Racing / Race 100% / Matrix Concepts / ODI / Mika Metals |
#13
|
||||
|
||||
Quote:
There was a little metal piece that was smashed and bent. When I went to the KTM dealer today, they found a rebuild kit from a 99 200 that would fit and was the same piston. But they didn't know what I was talking about in regards to the lever actually activating the piston. It was like I was talking Chinese to them or something. He didn't seem to happy, I didn't know a part number, nor was he happy I wanted to take KTM parts and put on a Gasgas......Only KTM dealer in this area, so guess I will deal with it or order off line. I called Hall's also, he is going to look into it and call me back. |
#14
|
||||
|
||||
Ok, this might sound dumb, but I have never heard of a carb venting into a Master Cylinder......
My brand new front brake M/C should be here today. So maybe I will be able to ride this afternoon as long as it bleeds good and is not a pain in the butt to get installed. |
#15
|
||||
|
||||
Do a search on this site for bleeding brakes, youtube, Motosport Outlet and other sites have "how to" video's...watch them a few times until you get a grasp on the concept of bleeding brakes.
Good luck
__________________
Rick 99 EC 200 06 RM 250 AMA D36 375X OTHG 375S ***Thanks for the support : Twin Air /O'Neil Racing / Race 100% / Matrix Concepts / ODI / Mika Metals |
#16
|
||||
|
||||
Just an update, a good one at that!
Compression check 95psi. Changed gear oil, purchased Rotella 5-40 Synthetic for next change. Cleaned air filter, ordered a new one! Disassembled and cleaned the carb, that is the easiest carb I have ever worked with! Put the new reeds in that came with the bike. New gasket, had to make it, since no one has anything got this reed assembly. Bled the clutch, still won't idle in gear. Kind of a pain when slowing down to a stop. New front brake M/C assembly, bled and works well. Adjusted Handle bars for my ape arms! Adjusted the shift lever up a bit. Adjusted rear brake lever up a bit. Releases air from front shocks, they had some pressure in them for sure. The best part of the day was the test ride, oh wow. With all that I did, it have some snap now. It is peepy for sure, yesterday it was sluggish on the take off, had to rev higher to get it to go. Now it just lugs a long just fine. The front end will come up, if I can keep traction. Wheel spins really easily, but I was in a grass field and it was a little wet from the rain about 2 hours ago. All and all, I'm a happy GG owner now and feel comfortable with the machine mechanically speaking. Me, not so much, it's been a long time since I ripped it up on a bike! |
#17
|
|||
|
|||
The bike looks good, you should be able to set up that ohlins shock fairly easily.
__________________
2011 GG EC 300E, 1994 CR 250R, 1984 RM 250 E, 2022 Ranger 300 "If you stop eating donuts you will live 3 years longer. It's just 3 more years that you want a donut." ―Comedian Lewis Black "I think best when I have a wrench in my hands." Soichiro Honda "Dreams are messages from the deep." -Unknown Sardaukar |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
The Gasser | iamovru | General Discussions & Announcements | 57 | 08-30-2014 12:21 PM |
gasser 125 | STEVEV | General Discussions & Announcements | 27 | 08-07-2012 12:40 PM |
New Gasser | JustTroItIn | General Discussions & Announcements | 9 | 09-16-2010 12:14 AM |
yay got another gasser!! | mountain thumper | General Discussions & Announcements | 11 | 07-19-2009 06:55 PM |