|
General Discussions & Announcements General Announcements, General Questions, e.g. What bike do I buy?, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Hey guys, tell me about the 2000 EC200
I have a chance to get a 2000 EC200 that needs some work. Basically the guy says it is a complete bike (missing a little plastic) that just needs pistons/rings and a cylinder bore. The person who has it got it from their local shop and just has too many other rebuild projects. He is a Trials GasGas rider. He says the engine is a 9/10 other than cylinder, plastic is 7/10, stock bars, hand guards, overall solid bike. Missing rear fender, front plate airbox cover. He says he and the mechanics at the local shop think the only issue is the piston/gaskets/cylinder bore.
I love my 99 EC300 and want another bike and need one for my buddy to ride. At $400 I really couldn't pass it up. So I put a $50 deposit on it. Before I go through with the rest of the payment though can some of my GG family educate me on this bike a bit and if you guys think it will be a good purchase as a woods bike for my buddy (and me too) to ride. Thanks so much, everyone. Last edited by flatout111; 05-13-2013 at 08:38 AM. |
#2
|
||||
|
||||
Heck for $400 how could one say no?Do it or you'll regret it.
|
#3
|
|||
|
|||
That is what I was thinking. He said the cylinder may could be cleaned(hopefully) and the gaskets and pistons have to be replaced but he and the shop he got it from's mechanics think that is the only issues. It does need a rear fender, airbox cover and front plate, has no kickstand or lighting but otherwise he said bike is very soid. Said the engine (other than piston) is a solid 9/10 and the plastics (what is there) is a 7/10. Has handguards, original handlebars all in good shape.
Sounds to me like a no brainer but soem reassurance wouldn't hurt me any. =) |
#4
|
|||
|
|||
3Gc3I33M15Ie5Ff5Jcd5be5954d1c5d9a1e02.jpg
3Gb3Kb3Fe5Ef5K35J5d5b207d77a060a11317.jpg 3E13G73Me5Id5G15F8d5bd0123314b0b91629.jpg |
#5
|
|||
|
|||
I have a yellow rear fender from my 99 EC300 (which now has light red plastic). It may fit. And I have a front black plate but I wold like a healdight to be honest. What do you think guys? It looks stripped down but he says it is complete other than some of the plastic.
|
#6
|
||||
|
||||
Quote:
__________________
Noah 2000 EC250 with 2011 transformation kit, KYB SSS forks, MN street title 16' Ski-Doo XS Renegade X 1200 4T 16' Specialized Fatboy trail 02' ZRX 1200r R.I.P. 72' Olds 500ci, Batten Heads, Street/Drag car, former CarCraft magazine centerfold (has-been) 15' TW200 |
#7
|
|||
|
|||
Really? Well that is good to know. I guess I need to get the VIN. Anyone ekse have any thoughts on this?
|
#8
|
|||
|
|||
I've emailed the seller for the VIN. I've put down a 50.00 deposit but that is based on the fact it is a 2000.
|
#9
|
|||
|
|||
Now I am worried about the model year.
|
#10
|
||||
|
||||
Even if it's actually a 99' you still wouldn't want it?
__________________
Noah 2000 EC250 with 2011 transformation kit, KYB SSS forks, MN street title 16' Ski-Doo XS Renegade X 1200 4T 16' Specialized Fatboy trail 02' ZRX 1200r R.I.P. 72' Olds 500ci, Batten Heads, Street/Drag car, former CarCraft magazine centerfold (has-been) 15' TW200 |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
EC200 kick start lever (2000 model) | sireid | Enduro Chassis & Body | 11 | 01-24-2010 02:56 AM |
which reeds/cage are best for ec200 2000? | stainlesscycle | General Discussions & Announcements | 1 | 08-15-2009 04:56 PM |