|
Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Box o' goods
Received most of the parts and cleaners to finish my bike. Rest will be here on Friday when it's my birthday. Anyone ever run one of those plugs? I thought I would try it out.
|
#2
|
||||
|
||||
I did try them on my 06 EC200. Did not notice any big difference, so I went back to the standard NGK BPxES series. In my case, that would be a BP7ES.
__________________
Anders "So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie) 2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper 2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper 1998 Bimota Supermono 1986 Duc Mille S2 1975 Guzzi sidecar hack 1961 Morini Corsaro 125 etc |
#3
|
||||
|
||||
I have an Iridium plug in my bike at the moment, like Anders I have noticed any difference except the price
|
#4
|
|||
|
|||
Yeah it was stupidly expensive and thought it would really do nothing, but I thought id try it anyways. Some forums say they last longer in their sleds blah blah blah. Not like I care. A standard br8es or whatever cost about 3 bucks at the local parts store. It should be better than the br9es thats in it right now. Not that I can ride anyways, its still freezing cold outside and its april. But on the bright side of things, the snow is gone
|
|
|