|
Enduro Product Reviews Feedback & Comments on Products Tested |
|
Thread Tools | Display Modes |
#8
|
||||
|
||||
I must say that the RB Designs carb mod is a must do.
I've had the modified carb on my bike for a couple months now. I finally found the time to jet it properly today.. Talk about a big difference, went to a 42 pilot, 180 main, and needle in the middle position. I found that I was shifting way less, the bike would lug down low. A quick blip of the cluch would pick the revs up and the bike would keep pulling. The bike also did not stall at all today. There was no smoke out the muffler at all. I am running race gas at 32/1. The race gas cured the pinging concern I was having. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
RB-Designs carb mod or PowerNow? | AZRickD | Enduro Intake/Carburetion - 2 stroke | 14 | 01-23-2009 05:50 PM |
Thanks to RB Designs & Gofasters | ejas | General Discussions & Announcements | 0 | 09-07-2007 05:10 AM |
RB Designs carb work | Eric K | Enduro Product Reviews | 0 | 08-21-2007 04:15 PM |
RB Designs Carb Mod? | Boomhauer | Enduro Intake/Carburetion - 2 stroke | 4 | 03-20-2007 03:09 PM |
Welcome RB Designs... | webmaster | General Discussions & Announcements | 2 | 07-20-2006 08:37 AM |