Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Intake/Carburetion - 2 stroke

Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc.


Reply
 
Thread Tools Display Modes
  #11  
Old 05-18-2020, 06:02 PM
Jakobi's Avatar
Jakobi Jakobi is offline
Super Moderator
 
Join Date: Oct 2010
Location: Australia
Posts: 7,994
Default

Yes to all above!

Reeds aren't the problem.

Get the head clearances and compression setup.
Get the float level in the carb nailed.
Get the jetting specs ball park, and then dialled.

I set my idles quite low so they tend to not idle very long in gear with clutch pulled. The drag pulls it down. In neutral she idles as long as I want.

Been like that on my last 3 engines - 2010, 2012, and 2018. I chased the 2010 around in circles for a long time. 2.8mm of squish clearance made the engine behave very inconsistently.


Reply With Quote


Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
VForce 4 reeds Wuzofoz Enduro Intake/Carburetion - 2 stroke 6 01-22-2020 07:11 PM
Brand New VForce 3 replacement reeds gasgasman Parts 0 12-25-2019 10:29 PM
vforce 4 reeds on 2012 gasgas chrille79 Enduro Intake/Carburetion - 2 stroke 4 10-17-2016 09:37 AM
Vforce 3 reeds candybuddy Enduro Intake/Carburetion - 2 stroke 1 08-03-2014 05:01 PM
My motor is sick :( Colemanian Enduro Engine - 2 stroke 9 06-02-2013 07:26 PM




All times are GMT -5. The time now is 11:34 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org