|
Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Pipe guard recomendations
Guys, I'm hoping to pick up an EC250 soon, and need to consider a pipe guard for the bike. Any recomendations on guards that fit and work well, thanks.
|
#2
|
||||
|
||||
I'm pretty new to Gagas, but over the years carbon fiber guards have become my favorite.
E-line, and P3 are the two options for CF guards on Gassers
__________________
2021 Beta 300RR 2014 Gasgas XC300R 2019 850 Pro RMK |
#3
|
|||
|
|||
You will get more responses if you start posting in the correct categories and not in the classifieds.
|
#4
|
||||
|
||||
Mate, you need to get a propower guard.
I have been running them for a couple of years now and have not dented the pipe at all. They are thicker than the other brands and from what I have seen they are finished a lot better too. Get on the propower factory hardware website and check them out for yourself. Alternatively, click on the sponsor link at the top of the page when it comes up. Cheers Mark.
__________________
Xr 250 ( first bike) 98 Rmx 2007 Gas gas 300(swapped for trials bike) 2008 280 Raga replica 2012 Gas gas ec 300 E |
#5
|
||||
|
||||
Pro power uses multiple layers of weave - making it much stronger than other alternatives.
Other CF pipe guards have been seen to allow flex - on a hit it will flex and allow the underlying pipe to dent - you won't see it until you pull the pipe guard off - so it feels and looks good until you pull it off after a while - so you are just "delaying the pain til later"... ;-) http://propowerinternational.com/sho...gas-pipeguards jeff
__________________
|
#6
|
|||
|
|||
Does anyone know of a ProPower dealer in the US ?
|
#7
|
|||
|
|||
think it is all done via propower direct - free shipping worldwide
__________________
2003 txt250 Pro 2013 Ossa 280i |
#8
|
|||
|
|||
And customs?
|
#9
|
||||
|
||||
Is this right on the website, fits 2012-2014? If so bummer.
__________________
2006 Gas Gas EC250 2011 Husaberg FE390 |
#10
|
||||
|
||||
Just give propower an email. They deliver worldwide and by all accounts from those on this forum that have already purchased, the communication and delivery time was very good.
Cheers Mark
__________________
Xr 250 ( first bike) 98 Rmx 2007 Gas gas 300(swapped for trials bike) 2008 280 Raga replica 2012 Gas gas ec 300 E |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
P3carbon fiber pipe guard Gas Gas stock pipe 08-11 | REVERUP | Enduro Product Reviews | 28 | 12-30-2013 09:05 PM |
07 pipe guard | Ud_luz | General Discussions & Announcements | 16 | 03-10-2008 06:47 PM |