Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Intake/Carburetion - 2 stroke

Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 12-14-2007, 12:06 PM
Mikael Mikael is offline
Member
 
Join Date: Dec 2007
Posts: 17
Default LTR Jetting to EC 200 -06

Hi guys ,

I would like to have some tips for - 06 EC 200 jetting .
Slide nr 5 is in carb + PV-cover + DEP-enduro silencer ( long ).
LTR - tips ? ( As we know the factory setting is odd...)

To where/whom I can place an order for LTR-parts to be sent to Europe ?

Mikael


Reply With Quote


  #2  
Old 12-14-2007, 12:15 PM
GMP's Avatar
GMP GMP is offline
Senior Member
 
Join Date: Jul 2006
Location: Jefferson Twp., NJ
Posts: 7,597
Default

www.lt-racing.com

On the "order" page there are distributors in France and Sweden listed.
Reply With Quote
  #3  
Old 12-14-2007, 01:58 PM
Mikael Mikael is offline
Member
 
Join Date: Dec 2007
Posts: 17
Default

Hi Glenn & thanks for your reply ,

France & Sweden = Do they have same knowhow as Les has ?
-I just try to avoid so called " maybe knowledge " ...
Reply With Quote
  #4  
Old 12-14-2007, 02:59 PM
barkeater's Avatar
barkeater barkeater is offline
Senior Member
 
Join Date: Jul 2006
Location: Moorhead, MN
Posts: 235
Default

Once you get the LTR jet kit, here is what I've worked out for my EC200. It's a 2003, similar setup to your 06, only I have an FMF Fatty/Turbine Core II silencer. This is all figured for 270 M (900ft) elevation. I'm a tad on the rich side, but not plug fouling rich.

Temp °F __Main__Slow__Clip__Air Screw
100°-120°___170 ____42 ____3 ____½OUT
80°- 100° ___175 ____45 ____3 ____½ OUT
60°- 80°____ 180 ____45 ____3 ____½ OUT
40°- 60° ____182 ____45 ____3 ____½ OUT
20°- 40° ____185 ____45 ____3 ____½ IN
0° - 20° ____190 _____48 ___ 3 ____½ IN
-10°- 0° ____195 _____48 ___ 4 ____1 IN
Below -10 __200 _____50 ___ 4 ____1 IN
__________________
Todd A
-------
2003 EC/O 200
Reply With Quote
  #5  
Old 12-14-2007, 04:19 PM
Mikael Mikael is offline
Member
 
Join Date: Dec 2007
Posts: 17
Default

Hi Todd ,

Thanks for your input .
-06 2-strokes has V-force reeds and different manifolds and different slides than -03 ECs and I assume that jettings should be different too , or ??
Reply With Quote
  #6  
Old 12-14-2007, 09:05 PM
GMP's Avatar
GMP GMP is offline
Senior Member
 
Join Date: Jul 2006
Location: Jefferson Twp., NJ
Posts: 7,597
Default

You can email or call Les directly. If you bought a kit he would be happy to help you.
Reply With Quote
  #7  
Old 12-15-2007, 02:20 AM
Mikael Mikael is offline
Member
 
Join Date: Dec 2007
Posts: 17
Default

Hi Glenn ,

Whats the best way to catch him ... e-mail ( address ? ) or phone ?

br
Mikael
Reply With Quote
  #8  
Old 12-15-2007, 05:47 AM
jeffd jeffd is offline
Gold Level Site Supporter
 
Join Date: Jul 2006
Location: Portland, Oregon, USA
Posts: 417
Default

The website is www.lt-racing.com
Phone number is 360-871-2259
e-mail is les@lt-racing.com

e-mail works fine.

jeff
Reply With Quote
  #9  
Old 12-16-2007, 09:41 AM
3hunerd 3hunerd is offline
Member
 
Join Date: Oct 2007
Posts: 55
Default

Hey Todd,

Your jetting table is much appreciated - you posted it once for me before, but could you explain the air screw portion? What is the starting point for the 1/2 in, 1/2 out etc.?

Thanks,

~300
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
where to go from here. jetting q. dank Enduro Intake/Carburetion - 2 stroke 105 04-11-2011 04:25 PM
LTR or JD Jetting Kit Elvis74 Enduro Intake/Carburetion - 2 stroke 7 04-08-2010 02:49 PM
Need help jetting an 06 EC 250 piperpilot12w Enduro Intake/Carburetion - 2 stroke 3 11-16-2008 11:19 PM
jetting help for 05 300 please... mackmack Enduro Intake/Carburetion - 2 stroke 5 09-03-2007 05:10 PM
06 300 jetting fury1 Enduro Intake/Carburetion - 2 stroke 1 07-31-2007 06:37 AM




All times are GMT -5. The time now is 06:39 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org