|
Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
04 ec300 carb ?
My gasgas is all factory never been touched its running rich on bottom end i live in east tn i pulled the needle coundnt find any numbers on it the needle the c clip was on the very top setting which would be set for lean pulled the main jet its a 178 runs great on top end the slow jet was a 35 im thinking that should be atleast a 40 or 42 and maybe goto a 175 on the main and which needle should i use ? im going to my local shops tomorrow see if they have jets i can buy and needles any input is much appreciated thanks guys
__________________
04 gasgas ec 300 sold 2011 six days ec GasGas Rules Ktm Drools |
#2
|
|||
|
|||
im in oz, so it may not help, but i run a n1eg, think, on the second clip. 38/180,. in my 04 ec300....
|
#3
|
|||
|
|||
im going to guess my elevation is around 1800ft above sea level give or take lots of mountains here
__________________
04 gasgas ec 300 sold 2011 six days ec GasGas Rules Ktm Drools |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Carb model on 04 ec300? | socalscott | Enduro Engine - 2 stroke | 4 | 01-12-2010 06:40 AM |
RB carb | 101racing | Enduro Intake/Carburetion - 2 stroke | 15 | 05-22-2009 10:33 AM |
What carb do I have? | forgiven | Enduro Intake/Carburetion - 2 stroke | 1 | 05-04-2009 09:51 PM |
How to setup the carb mix on a 2001 ec300 | GasGas.ec300.Andy | Enduro Intake/Carburetion - 2 stroke | 1 | 01-07-2009 06:54 PM |
RB Carb Mod | RBD | Enduro Product Announcements | 10 | 06-29-2008 07:57 PM |