|
|
|||||||
| Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
 |
|
|
Thread Tools | Display Modes |
|
#1
06-16-2009, 11:17 PM
|
|||
|
|||
14 tooth on my GG450
Bought a Talon 14 t.at the beginning of the year but didn't bother to install it until today. I had read previous posts on changing over the GG as well as Re-sprocketing my DRZ to a 16t. Let me say that going from a 15 to a 16 on the DRZ was much more trouble than going from a 13 to a 14 on the GG. I didn't have to do any grinding on the clutch housing and only just a very little on one spot on the protector.
Took very little time to do it and for setting up a Supermoto bike it was definitely worth doing. For all around street (canyon) use I am now running 16-36 with a 150-60-17 rear tire. Tony 
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Fuel Pump Fuse (A8) on GG450 blowing | Crankin04 | Enduro Engine 4 stroke (including EFI & Exhaust) | 5 | 08-30-2010 10:41 AM |
| Reset TPS for GG450 | Crankin04 | Enduro Engine 4 stroke (including EFI & Exhaust) | 0 | 06-17-2010 08:42 AM |
Linear Mode
