|
Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
|
Thread Tools | Display Modes |
#11
|
||||
|
||||
Nato. I was going to get the Cervantez 2011 plastics kit for my 2010 model to keep as spares for the next freshen up. The price of the kit was alright, but the postage is with Fedex and you pay. I think it cost me something like 65 euro postage just for a heap of gaskets and a couple other small things. Hardly a large order by any means. With the plastics thrown in the postage went up to 150 euro. Depending on the exhange (which has improved since I ordered of course ) it works out around $180.
Then again getting my shock back from Ohlins is going to cost an arm and a leg with UPS, and they've had too many issues with USPS so the cheap options is out. |
#12
|
||||
|
||||
Quote:
That is for wheels with tyres , brake discs, rotor and brake bracket, so I guess that is not too bad. Cheers Mark
__________________
Xr 250 ( first bike) 98 Rmx 2007 Gas gas 300(swapped for trials bike) 2008 280 Raga replica 2012 Gas gas ec 300 E |
#13
|
|||
|
|||
So roughly 400 bucks delivered for the replica plastics. Not bad really but postage is never cool
__________________
Does this rag smell like chloroform? |
#14
|
|||
|
|||
this is what i have for my sm
front 17x3.5 inch with a 120/60/17 rear 17x4.25inch tyre 150/60/17 both are pirelli diablo rosso 2 you need the softest tyres in these size or you cant get the heat in the tyres, the 150 is the biggest you can fit with out rubbing keep the chain long as it will rub in the swingarm. i use two chains for my wheels the front brake caliper is a brembo 22.5381, the bracket did not have any part numbers on http://www.ebay.co.uk/itm/2002-CCM-R...item2a21038b52 above is the caliper set up im using for now the ktm lc4 sm use the same set up, im looking at getting a 4 pot brembo but will need a bracket made
__________________
03 ec300 honda cr500 94 |
#15
|
|||
|
|||
ops forgot the rims are BERH and the hubs AJP front disc 320mm and back same size
__________________
03 ec300 honda cr500 94 |
#16
|
||||
|
||||
Yeah over all the price is still reasonable. I paid $200 for just stickers a while back so to have factory stickered plastics from front to back for a bit more is a shithot buy. If I had of needed them I would have pulled the trigger but with only a few beers under the belt and no need I decided to wait it out.
|
#17
|
||||
|
||||
Thanks Gassergrant, did you try the front standard brake caliper first ?
Jake, sounds like you needed a few bears to push you into the buy (if you know what I mean Cheers Mark
__________________
Xr 250 ( first bike) 98 Rmx 2007 Gas gas 300(swapped for trials bike) 2008 280 Raga replica 2012 Gas gas ec 300 E |
#18
|
||||
|
||||
I'm picking up what you're putting down. The big polar bear is riding me for a 2013 200 all too often. Worse than a monkey on my back!
|
#19
|
||||
|
||||
Quote:
Thanks for your support guys ! Antonio |
#20
|
||||
|
||||
Cheers Antonio,
I now have the bike back from getting suspension done , so when the rims etc arrive you guys will be the first to see it. Mark
__________________
Xr 250 ( first bike) 98 Rmx 2007 Gas gas 300(swapped for trials bike) 2008 280 Raga replica 2012 Gas gas ec 300 E |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Gas Gas Supermoto Wheels (UK) | Ryan_250 | Parts | 6 | 03-28-2013 08:41 AM |
supermoto wheels | gassergrant | Enduro Chassis & Body | 0 | 06-21-2011 10:34 AM |
Supermoto | DaveJ | General Discussions & Announcements | 2 | 02-19-2007 10:11 AM |