|
Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
S3 Cylinder head does not fit
Hello,
I bought a S3 cylinder head for my 1998 Gasgas EC250, but it is too big. On the website it said "fits from 1998-2017". The Bolt circle on the S3 head is 95mm. The one on my cylinder is 88mm. I did not really find something online, but may my bike have a 1997 motor? It also has the balancer shaft. If so, can i get the S3 head for a 1997 motor? I really want it, but i dont want to buy a new cylinder (but the cylinder would interchange between 97 and 98 onwards, right?) |
#2
|
|||
|
|||
may out of luck, if you still have the 97 head, can always get that rechambered and perhaps cerakoted if you are looking for an aesthetic boost.
|
#3
|
|||
|
|||
I still have the original head. I bought the S3 head mainly for aesthetics. So you think if i get it ceracoated it will hold up to the temperature?
|
#4
|
|||
|
|||
it should hold up just fine.
|
#5
|
||||
|
||||
Ceracoat will be fine. Getting the chamber reprofiled and squish down to 1mm will make you happy with the result. Need to get chamber done in conjunction with skim.
__________________
'07 EC300 GG '14 TXT250 GG '? 496 CPI Cheetah RZ/RGV hybrid '22 765 Street Triple RS '21 XTrainer '69 Stinger T125 Suzuki '23 TRS 250RR (it's a Trials thing) |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
wtb ec 300 cylinder&head | hookedongasgas | Parts | 2 | 09-12-2018 10:10 AM |
Swopping 1997 Cylinder head with 2005 head | EC250 | Enduro Engine - 2 stroke | 10 | 12-15-2015 10:13 AM |
S3 Cylinder Head Kit *New* | Darrendeep6 | Parts | 3 | 10-28-2015 08:23 PM |
Coolant leaking through cylinder head socket-head bolts. | GGRider01 | Enduro Engine - 2 stroke | 5 | 10-17-2015 07:38 PM |
Cylinder head oil | Shooter | Enduro Engine - 2 stroke | 4 | 12-29-2014 03:53 PM |