Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Chassis & Body

Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing.


Reply
 
Thread Tools Display Modes
  #1  
Old 04-30-2016, 09:24 AM
motopsycho87 motopsycho87 is offline
Senior Member
 
Join Date: Jun 2013
Location: Suffolk, UK
Posts: 905
Default Rear brake calliper crossover?

Need to know what rear brake calliper can crossover onto an 06 300? Cheers!


__________________
2006 EC300 Enduro - Ignitech CDI - 38/NECW#2/165 FMF gnarly, FMF shorty, .50 front 5.7 rear

2016 RM-Z450
Reply With Quote


  #2  
Old 04-30-2016, 11:19 AM
GGRider01 GGRider01 is offline
Senior Member
 
Join Date: Jun 2015
Posts: 483
Default

http://www.gasgasrider.org/forum/showthread.php?t=21191

Rockefeller was able to use one off of a KX. Check it out.

This list implies crossover between a whole bunch of bikes: http://www.braking.com/catalogue/det...rticolo=CA1403
Reply With Quote
  #3  
Old 05-02-2016, 03:04 AM
motopsycho87 motopsycho87 is offline
Senior Member
 
Join Date: Jun 2013
Location: Suffolk, UK
Posts: 905
Default

I think I'm gonna try and braze it back to life with hts2000, and creep oil / EZ out the bleeder... Fingers crossed aye!
__________________
2006 EC300 Enduro - Ignitech CDI - 38/NECW#2/165 FMF gnarly, FMF shorty, .50 front 5.7 rear

2016 RM-Z450
Reply With Quote
  #4  
Old 05-16-2016, 09:27 AM
mmink724 mmink724 is offline
Member
 
Join Date: Oct 2015
Posts: 3
Default Rear caliper cross over

Hey, I was having rear caliper issues on my 05 300 and rather than buy a new caliper I went ahead and rebuilt the old one. I used a 97 Honda CR250R rear caliper seal kit and it fit perfect. Just make sure you clean the piston and inside the caliper really well. The little gaps where the seals fit in need to be free of any dirt and debris. Brakes work better but I still think brake pedal slop is the source of the majority of my rear brake weakness. good luck! But a honda CR250 rear caliper is exactly the same part if you decide to replace, But the rebuild is very easy and should only take you about 10 minutes.
Reply With Quote
Reply




Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Rear brake pedal crossover? jt633 Enduro Chassis & Body 14 09-14-2017 09:20 AM
'02 300ec calliper seals Bones1999 Enduro Chassis & Body 2 10-15-2012 10:25 AM
parts crossover - rear brake pedal? stainlesscycle Enduro Chassis & Body 8 06-16-2011 07:05 PM
Rear brake master cylinder crossover? bergerhag Enduro Chassis & Body 5 04-09-2009 09:26 AM
Rear brake line crossover? ScottyR General Discussions & Announcements 2 07-04-2007 06:17 AM




All times are GMT -5. The time now is 03:21 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org