MotoSeat Covers Available for 12s and 13s

[twowheels]

Originally Posted by Diggs345

I'd like to see

Was there any change in design from 12 to 13 apart from the seat bolt , is it a little lower

The seat height difference 'on-bike' is due to different length pull rods on the suspension linkage - the seat foam is the same thick(thin) ness.

[adv rider]

Yes, I am wondering if the 2011 is much diff than the 12-13' model. I really would like a two tone red/black with the pleats like the motocrossers use.

sign me up if they are available somewhere

[adv rider]

Originally Posted by twowheels

Got it - shipping out in the am.

This just in - the 2007-2011 seat cover template is complete. Let the ordering begin ...

How do I go about ordering a seat cover? 2011 250, red sides, black top w/ red pleats. is this possible? I will order this week if so

John

[twowheels]

Originally Posted by adv rider

How do I go about ordering a seat cover? 2011 250, red sides, black top w/ red pleats. is this possible? I will order this week if so

John

PM me and I'll get a Paypal to you.

[StuJohnson]

Originally Posted by Diggs345

I'd like to see

Was there any change in design from 12 to 13 apart from the seat bolt , is it a little lower

Here is what I did to modify my 2012 for the top mount seat bolt.

No means is it the best way but it has worked for me so far. I purchased a Metric Pronged Tee Nut like this.



I then heated it rather hot with heat gun and also got the plastic area on the fender warm but not too hot to melt it. Once the Tee Nut was nice and hot I pressed it slowly down into the plastic black fender hole... After it cooled I then put a nice coat of epoxy as a secondary bond.



I then purchased this kit from motocrosscenter. In Reality you would not need this kit and could come up with your own at the hardware store.

http://www.motocrosscenter.com/ecomm...oducts_id=8583

(This kit includes the bolt, red anodized washer, and a plastic black washer that holds the bolt in place when the seat is removed)

Here is another photo.

[Rick]

You mean like this? http://www.mcmaster.com/#metric-tee-nuts/=mjtjbg scroll to bottom

[StuJohnson]

Originally Posted by Rick

You mean like this? http://www.mcmaster.com/#metric-tee-nuts/=mjtjbg scroll to bottom

yes - I bought mine at Home Depot for $0.75

[nambo-trev]

Here's my moto seat cover, man is it nice to have fresh grip!!

ImageUploadedByTapatalk1368068469.134193.jpgImageUploadedByTapatalk1368068478.734275.jpg

[twowheels]

Originally Posted by nambo-trev

Here's my moto seat cover, man is it nice to have fresh grip!!

Attachment 3295Attachment 3296

Looks great!

[Diggs345]

Got mine done , thanks pal