|
Enduro Engine 4 stroke (including EFI & Exhaust) 4 stroke engine, EFI, and exhaust discussion |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Retro fit carb
Is it possible to retro fit a carb from a 450 Pampera to a 04 FSE ? I've had enough of the friggin around the EFI has caused me and just want reliablity.
|
#2
|
||||
|
||||
If the engines are in the same state of tune I don't see why not. You may have to do somthing creative with airboxes. Also check there is enough clearance - I assume it's am FCR and they are quite tall. If the engines are in a different state of tune you could have quite a bit of friggin around jetting it.
|
#3
|
||||
|
||||
MotoWest was working on a conversion kit. Don't know if ever saw the light of day.
|
#4
|
|||
|
|||
I'm getting close to giving up on sorting out this EFI problem and thought it could be a viable option, Pampera's sold here ok , so there could be parts around.
|
#5
|
||||
|
||||
What your wanting to do is not rocket science. 39 mm fcr Mikuni and possibly an drz ecm and a manifold to carb boot, incidently all readily available on ebay.
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
RB carb | 101racing | Enduro Intake/Carburetion - 2 stroke | 15 | 05-22-2009 10:33 AM |
What carb do I have? | forgiven | Enduro Intake/Carburetion - 2 stroke | 1 | 05-04-2009 09:51 PM |
RB Carb Mod | RBD | Enduro Product Announcements | 10 | 06-29-2008 07:57 PM |
RB carb | spdfrek | Enduro Engine - 2 stroke | 2 | 03-22-2008 10:28 PM |
Carb set up please help | thingymijig | Enduro Intake/Carburetion - 2 stroke | 2 | 02-24-2007 01:55 PM |