Rebuild questions

[ram1000]

I am rebuilding a friends 2004 250cc GG. Can the barrel be bored oversize for a new piston or is the sleeve to narrow to bore it?

THanks...

[nmrider]

It is not a boreable cyl it is nickle plated needs to be replated.
Harold

[ram1000]

OK
Thanks...

[ram1000]

Where can I buy parts for this bike??? I live in northeast Oregon

[StuJohnson]

Best thing is to do is use the search tool here. There is a lot of info here plus the input comes from all over the world!!! IMO - the best Forum!!!!

These to topics that Jakobie did will allow you to learn a lot about the motor.

http://www.gasgasrider.org/forum/showthread.php?t=14730

http://www.gasgasrider.org/forum/showthread.php?t=11970


Here are parts specialists that come to my head as of now

GoFasters.com - Talk to Mark there

AfterHours Cycle
http://www.afterhourscycle.com (aka twowheels) on here

Another place I have heard about but never purchase from is.
http://www.halls-cycles.com/

For some the cylinder work --- Just West of you near Portland is.
RB Designs
http://www.rb-designs.com

[StuJohnson]

Oh and here is link to the GG Shop Manual

http://www.supertrial.com/ARohjekirj...irja%20eng.pdf

[pscook]

Another supplier is Bob Piper at North Tahoe Motorsports. He sells Wossner piston/top end kits on ebay. His parts supply and knowledge is deep regarding all things gasser. Technical information as well as parts, good combination.