|
Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Lost Chain Roller Behind Kickstand
I have a 2011 EC300. On the last ride I lost the lower kick stand bolt. Does that kockstand lower mount include a chain roller? I thought it did but I can't remember. The GoFasters image shows there are bolts on each side of a chain roller.
__________________
2011 GG EC 300E, 1994 CR 250R, 1984 RM 250 E, 2022 Ranger 300 "If you stop eating donuts you will live 3 years longer. It's just 3 more years that you want a donut." ―Comedian Lewis Black "I think best when I have a wrench in my hands." Soichiro Honda "Dreams are messages from the deep." -Unknown Sardaukar |
#2
|
|||
|
|||
Yes.
Blue loctite. |
#3
|
||||
|
||||
Had this happen too.
Theres a bolt, a bushing, and 'roller' which isnt really a roller as such just a polyethylene or similar wheel . The wheel runs on the bushing. The predrillec hole in the bush is smaller than the bolt that needs to thread into the stand bracket. Typical gasgas I guess. You could make a better set up if you wanted too. |
#4
|
||||
|
||||
Its actually a good setup, as the clearance allows it to continue functioning and not get fouled with dirt, and there is no ball bearing to seize or fail. The HDPE rollers seem to last for years. The bushing/spacer can wear out in a couple years but it doesn't matter much. Just Loctite it and all is good.
|
#5
|
|||
|
|||
Thanks for response! I couldn't remember what the whole assembly looked like.
__________________
2011 GG EC 300E, 1994 CR 250R, 1984 RM 250 E, 2022 Ranger 300 "If you stop eating donuts you will live 3 years longer. It's just 3 more years that you want a donut." ―Comedian Lewis Black "I think best when I have a wrench in my hands." Soichiro Honda "Dreams are messages from the deep." -Unknown Sardaukar |
#6
|
||||
|
||||
It is a far better setup than the roller bearing types that only last a season if your lucky. I had 5 years of hard running on my 125 with no issues.
__________________
2018 EC 300 |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Upper and Lower chain roller 2002 XC300 | pscook | Enduro Chassis & Body | 1 | 11-28-2011 10:07 PM |
2011 300 Chain Roller/Stand Failure Fix | coolum74 | Enduro Chassis & Body | 2 | 11-23-2011 06:53 AM |
that little chain roller | boostedte37 | Enduro Chassis & Body | 12 | 05-26-2010 08:24 PM |
2000 EC250 lower chain roller | jhendr3702 | General Discussions & Announcements | 8 | 03-19-2009 11:05 PM |
Lost key | NaloBoy | Enduro Electrical & Wiring | 0 | 12-12-2007 04:29 PM |