|
Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Reccomendations for 125 GG clutch plates?
There are many options available. Does anyone have GG125 experience with aftermarket clutch plates?
|
#2
|
|||
|
|||
I use the original from gasgas. This last for more than 150 hours in mine.
Gesendet von iPhone mit Tapatalk
__________________
4 strokes are only good for power generators |
#3
|
||||
|
||||
Thanks I bought the Pro-X and will see how it works.
|
#4
|
||||
|
||||
The stock clutch has 2or 3 aluminum plates mixed with the steels don't no why I bet the pro x are all steel
|
#5
|
||||
|
||||
Throw those stock aluminum plates in the garbage and replace them with the stock steel ones. You will be rewarded with a clutch that will last a very long time. I put 5 years of MX, Hare Scramble and ice racing and trail riding on one clutch after I ditched those aluminum plates.
__________________
2018 EC 300 |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Clutch friction plates | X53Gunner | Enduro Engine - 2 stroke | 4 | 01-03-2017 11:38 AM |
Clutch plates worn | speeddemon | Enduro Engine 4 stroke (including EFI & Exhaust) | 6 | 01-28-2012 09:30 AM |
broken clutch plates? | stainlesscycle | Enduro Engine - 2 stroke | 24 | 09-27-2011 04:39 AM |
clutch plates | blanc | Enduro Engine - 2 stroke | 3 | 03-18-2011 05:08 AM |
clutch plates | mxdj2003 | Enduro Engine - 2 stroke | 4 | 11-02-2009 01:37 PM |