|
Enduro Electrical & Wiring Lighting, Ignition, Wiring, Plugs, etc. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Electric start help please!
A fellow GasGas owner has offered to sell me his electric start components off his 2013 EC300 and I'm trying to make sure of all the parts I need from him. Do I have this right? Would be installing it on my '11 EC250R.
starter motor bendix ignition sprocket (how does this mount?) flywheel case cover gasket for that cover powervalve cover w/upper starter mount I already have the bigger stator. Do I need the flywheel from his as well or will my current one work? I have the electric start subframe and I can source/make my own harness, relay, switch, battery, and DC conversion. Lastly, and very important, what would be a fair price for the parts from him?
__________________
WildAzzRacing YouTube channel Trail Riders of Southern AZ club AZ State Parks OHV Ambassador '11 EC250R '98 KDX220 |
#2
|
||||
|
||||
You will need the flywheel retaining nut from the e-start model, and there are shims to adjust ignition sprocket placement.
I sold a new take off e-start for $400 Hope this helps.
__________________
15 GASGAS EC 250 19 Sherco SE 125R |
#3
|
|||
|
|||
The large gear sits over the rivets on the flywheel. It can be gently pried off. A long as both bikes use a 2K3 ignition/flywheel, you should be fine.
You may need to make a thick igntion cover gasket to space out the flywheel cover to assist in correcting the gear mesh. Crankshaft spacing can vary enough that different methods of correcting the alignment are needed.
__________________
2011 EC250E |
#4
|
||||
|
||||
Quote:
Quote:
Sounds like getting it to work correctly is going to be fun. (sarcasm) Thanks for the input and tips!
__________________
WildAzzRacing YouTube channel Trail Riders of Southern AZ club AZ State Parks OHV Ambassador '11 EC250R '98 KDX220 |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
EC/XC Electric Start Issue | Wably | Enduro Electrical & Wiring | 1 | 11-06-2018 01:02 PM |
Electric Start Sub-frame | jcs003 | Parts | 18 | 05-09-2018 07:40 AM |
Will there be an electric start for 2012 | nmrider | General Discussions & Announcements | 5 | 09-19-2011 03:04 PM |
electric start 2 Banger Gas Gas | Klausen | Enduro Engine - 2 stroke | 1 | 06-21-2010 06:19 PM |
Electric Start EC300 | J D | General Discussions & Announcements | 25 | 02-22-2010 03:12 PM |