Quick throttle

[Todd5774]

Has anyone heard of a 'quick throttle' that will fit a 300ec?

Am after a shorter turn as am having problems with my wrist. So can't regrab to get WOT

[gasgasman]

http://www.motionpro.com/motorcycle/...throttle_kits/

[INABIL]

I have an aftermarket throttle with interchangeable cams on it. I use the one with the slower than stock cam to keep from spinning the tire in nasty conditions.
I think the name of the company is G2. It is an aluminum throttle with open end for using bark busters or comes with snap on cap to cover opening. I think it comes with three different cams, stock, fast and slow.

[Todd5774]

Ta, tried emailing motion pro but there out of office til April, not sure if they will ship to the UK

[Todd5774]

Scratch that, found one in the UK, will see if it helps

[Jakobi]

G2 Ergonomics in the states. Will have them in stock. Come with a variety of cams, however if you want the shortest pull you will need to modify/relieve the throttle body to allow the cam to fit (or they sell a pre modified body too).

I run one on both my bikes as I find it tiresome to have to regrip between part throttle and WOT all the time. It does make the delivery much more snappy/abrupt though so takes a bit more control.

[hamilton]

G2 complete setup is the one.
They don't work very well on small bores.
If you are in no hurry I have one with just one ride on it.
$50 plus postage. From the U S.

[Todd5774]

Found a vortex in the UK so will fit that wednesday when it arrives and see if it makes a difference, as the pain in my wrist has got to point where I'm not riding now, going to see if I can find some of those dampened flexx bars too.