|
Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
2005 EC200 Small End Bearing
Doing a top end service on my 2005 Gas Gas EC200. Replating the Cylinder and new Wossner Piston. Wossner states the small end bearing to be different from that of an EC250/300. The dimensions of the bearings are different with the EC200 bearing being 2mm shorter (19.8mm vs 21.8mm).
The history of the bike is unknown, but I found a wossner A size piston and 21.8mm small end bearing previously installed. EC200 P/N: N1020 EC250/300 P/N: N1021 Does have any experience rebuilding an EC200 and can confirm which small end bearing I need. I have purchased the shorter one and it fits inside the crank just fine, however it is flush with outsides of he small end crank opening. The longer bearing will overhand the small end crank opening by 1mm on each side. Does this matter? |
#2
|
||||
|
||||
Not for a very long time.
But do consider the piston and how much it may limit bearing sideways travel. some are quite angled top to bottom.
__________________
'07 EC300 GG '14 TXT250 GG '? 496 CPI Cheetah RZ/RGV hybrid '22 765 Street Triple RS '21 XTrainer '69 Stinger T125 Suzuki '23 TRS 250RR (it's a Trials thing) |
#3
|
||||
|
||||
I am about to rebuild my 2015 EC200's top end quite soon. I have all the parts waiting for me in the workshop. I can pop out tonight and measure the bearing.
__________________
Anders "So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie) 2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper 2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper 1998 Bimota Supermono 1986 Duc Mille S2 1975 Guzzi sidecar hack 1961 Morini Corsaro 125 etc |
#4
|
||||
|
||||
I could't find the bearing, but I checked the 2015 parts list. There, the 200 and 250 share the same part number.
Sent fra min YAL-L21 via Tapatalk
__________________
Anders "So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie) 2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper 2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper 1998 Bimota Supermono 1986 Duc Mille S2 1975 Guzzi sidecar hack 1961 Morini Corsaro 125 etc |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Need confirmation please! EC200 small end bearing | Stephan | Enduro Engine - 2 stroke | 2 | 08-29-2023 03:29 PM |
2005 Gas Gas EC200 | Rien Deau | Used Bikes | 0 | 05-07-2017 07:38 PM |
GasGas 125SM 04 Small end bearing | Nicke_pota | Enduro Engine - 2 stroke | 1 | 05-04-2017 12:10 PM |
2001 ec200 Rod Bearing Kit | mattholew | Enduro Engine - 2 stroke | 12 | 01-19-2016 05:26 PM |
2004 EC200 Gas Tank Looks Small | Zman | Enduro Chassis & Body | 14 | 09-17-2014 04:43 AM |