What did you do to your Gas Gas today?

[pscook]

YZ250 kicker- Perfect addition. Should have done this before the e-start.

Raced today in 17-20 F clear and dry conditions. Bike is cleaner than when it arrived (no mud!). Spun/dropped it once on glare ice in the whoop section, generally teetered about on the rest of the course.

[Bandit9]

Cold and rained all day. So I got a lot done in the garage today.

I swapped the handle bars from my WR to the 300. I hate the Twinwalls with a passion.
Sealed up the air box
Installed an in line fuel filter
Finally was able to install the Magura MC rebuild kit and was able to bleed it and get it working! Quite an accomplishment for me
Bled the rear brake
Taped up the little tabs on the side panels to correct the loose sloppy fit. It was really annoying me the half ass way the side panels went into those slots on the 2012. This was some Gorilla tape and it worked great. Nice and snug now.
[IMG][/IMG]

[IMG][/IMG]

[swazi_matt]

Originally Posted by cbutler

That's what I like to do to mine also but it been 28 here since Friday with ice on the street so I just been drinking beer and keeping the fire going

It was about 25 here .... C

[Pepperami]

What year yz?

[bkwdc]

Originally Posted by nambo-trev

I just installed rekluse basket and new stock fibres with rekluse manual core pressure plate and inner clutch hub. Very quality gear!

Can i use core exp pressure plate with external slave and go back to manual?

[desertgasser300]

Originally Posted by bkwdc

Can i use core exp pressure plate with external slave and go back to manual?

I don't believe you can use the core plate? Rekluse does have a manual pressure plate. I think I have one in the garage that will never get used? I can look for it on Wednesday morning. I am at work til then.

[adv rider]

Originally Posted by pscook

YZ250 kicker- Perfect addition. Should have done this before the e-start.

Raced today in 17-20 F clear and dry conditions. Bike is cleaner than when it arrived (no mud!). Spun/dropped it once on glare ice in the whoop section, generally teetered about on the rest of the course.

Where was a race?I did a search last week,and couldn't find any events.I have not done anything else to my bike. My van is down,and it will be months before I can fix it- no riding for me.

[bkwdc]

Originally Posted by desertgasser300

I don't believe you can use the core plate? Rekluse does have a manual pressure plate. I think I have one in the garage that will never get used? I can look for it on Wednesday morning. I am at work til then.

Thank you sir.

[nambo-trev]

Yes I agree I don't think you can use that pressure plate

[pscook]

Originally Posted by adv rider

Where was a race?I did a search last week,and couldn't find any events.I have not done anything else to my bike. My van is down,and it will be months before I can fix it- no riding for me.

Straddleline West Coast MC ATV Winter series. THere is a race at Pacific next weekend, Saturday the 14th. Look on thumper talk for the fliers, I'll see if I can pull them over to this site. I might head up to Walker next weekend instead of the race, I hate going to races alone. I'll drop you a note later in the week as my plans firm up.