Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine - 2 stroke

Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 02-05-2009, 01:07 PM
lvnspeed lvnspeed is offline
Member
 
Join Date: Jan 2009
Location: Birmingham AL
Posts: 15
Default Looking for someone in the USA to build a motor.

I have a 200 motor that needs a crank rebuild and looking for someone to put the motor back together so all I have to do is put it back in the bike and go.

PM me if you can do this and estimated price.


Reply With Quote


  #2  
Old 02-05-2009, 02:05 PM
PEB PEB is offline
Senior Member
 
Join Date: Aug 2006
Posts: 1,152
Default

If you can take it in and out of the bike you can rebuild it. I have done it 3 times now, the rear linkage or a clutch job on the car is more of a pain than rebuilding the bike. I spent some time last go round getting the crank perfectly centered between the cases, it came out with very little vibes and noise, unlike my newer 07.
Reply With Quote
  #3  
Old 02-05-2009, 03:23 PM
steve steve is offline
Senior Member
 
Join Date: Jan 2008
Posts: 114
Default

I did it last year on my 06 300 last year with help from people from here!Engine is strong even after a year of Harescrambles no noise leaks or anything else.Just do it and put the$1000 towards something else like tires and fuel.
Reply With Quote
  #4  
Old 02-05-2009, 04:45 PM
lvnspeed lvnspeed is offline
Member
 
Join Date: Jan 2009
Location: Birmingham AL
Posts: 15
Default

I have had No luck with 2 strokes and just would like to see what someone would charge me before I dive into it.
Reply With Quote
  #5  
Old 02-05-2009, 04:53 PM
webmaster's Avatar
webmaster webmaster is offline
Administrator
 
Join Date: Jul 2006
Location: Portland, Oregon, U.S.A.
Posts: 1,751
Default

For the crank itself - I would highly recommend Ron & RB-designs. I would see if Les @ LT-Racing has time to do the motor for you, but he is pretty slammed with suspension work right now -> check with Ron to see if he will do the whole motor for you... Either Ron or Les or more than over-qualified to do this for you.

It might help if you let folks know which part of the country you are located.

jeff
Reply With Quote
  #6  
Old 02-05-2009, 06:12 PM
LAWMAN's Avatar
LAWMAN LAWMAN is offline
Platinum Level Site Supporter
 
Join Date: Jul 2007
Posts: 257
Default

the dealer here in Memphis can do it for you, & he or I could meet you at West Point to get the motor & take it back & save you from shipping it. You want me to ask for a quote?
Reply With Quote
  #7  
Old 02-06-2009, 08:41 AM
lvnspeed lvnspeed is offline
Member
 
Join Date: Jan 2009
Location: Birmingham AL
Posts: 15
Default

Yes please the top end is new just need the crank rebuilt and the motor reassembled with new gaskets seals ect.
Reply With Quote
  #8  
Old 02-06-2009, 09:08 AM
2 strokes 4 life's Avatar
2 strokes 4 life 2 strokes 4 life is offline
Senior Member
 
Join Date: Apr 2008
Location: Grande Prairie, Alberta, CND
Posts: 678
Default

Eric Gorr does great work and it is about $175 for tear down and put back together and then what ever for parts.
__________________
2002 Gasgas EC250 (gone not forgotten)
2012 Ktm 300xc
2001 Gasgas EC300
Lifes journey is not to arrive safely at the grave in a well preserved body, But rather to skid in sideways totally worn out shouting holy cow what a ride !!!!
Reply With Quote
  #9  
Old 02-06-2009, 12:14 PM
eff's Avatar
eff eff is offline
Silver Level Site Supporter
 
Join Date: Jul 2006
Location: RI
Posts: 1,755
Default

Other members have horror stories about sending their motors to EG. I'd think twice about that move. I'd send it to someone that supports the brand, and not someone that refers to it as an "off brand."
__________________
2004 GasGas DE250
Reply With Quote
  #10  
Old 02-06-2009, 08:41 PM
GMP's Avatar
GMP GMP is offline
Senior Member
 
Join Date: Jul 2006
Location: Jefferson Twp., NJ
Posts: 7,597
Default

I might be interested in doing it for you if Les is too busy. Is the motor apart now? If so are all parts clean and organized? No surprises? Get back to me.
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Christini to Build Kawasaki and GasGas Prototypes Jim Cook General Discussions & Announcements 4 03-04-2009 10:39 PM
04 starter motor pondmore Enduro Engine 4 stroke (including EFI & Exhaust) 2 06-23-2007 05:56 AM
Rebuild 200 Motor ramcclure200 Enduro Engine - 2 stroke 0 05-04-2007 08:10 AM




All times are GMT -5. The time now is 04:36 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2023, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org