Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Chassis & Body

Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing.


Reply
 
Thread Tools Display Modes
  #1  
Old 02-11-2019, 04:08 PM
welsh.Z.S. welsh.Z.S. is offline
Member
 
Join Date: Oct 2016
Posts: 73
Default Caliper movement

Hi guys , are the rear calipers (2009) supposed to have a little movement ? Noticed mine moves a bit when I was doing my pads last week.


Reply With Quote


  #2  
Old 02-11-2019, 05:35 PM
gasgasman's Avatar
gasgasman gasgasman is offline
Super Moderator
 
Join Date: Jul 2006
Location: Pearland Texas
Posts: 4,594
Default

Some movement is acceptable.
Makes the caliper self centering.
Reply With Quote
  #3  
Old 02-12-2019, 12:03 AM
Jakobi's Avatar
Jakobi Jakobi is offline
Super Moderator
 
Join Date: Oct 2010
Location: Australia
Posts: 7,994
Default

Depending on hours.. you will see more or less..

New bikes everything is snuggly.. Of course they need to be able to float a little bit. I know the rear caliper on my 2010 with 320hrs or so has a bucketload of play. Rocks back and forward kind of, but still works. You can replace the rubbers and also the locating pins on the carrier and caliper to bring them back into tolerance if you feel it's too sloppy... Or just buy a new bike and love how nothing is flogged out! Can't beat the new bike feeling!
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Power valve end play, side to side movement, rattle... Davehuge Enduro Engine - 2 stroke 11 11-21-2021 04:45 PM
PV shaft movement (video) 2010 ec300 justsam Enduro Engine - 2 stroke 6 04-04-2014 10:21 PM
Brake caliper help! yourmatedave Enduro Chassis & Body 5 05-18-2013 04:40 AM
Clutch Slave. How much movement? Marki Enduro Engine - 2 stroke 5 04-26-2013 12:38 PM
clutch slave movement ? jhendr3702 Enduro Engine - 2 stroke 0 03-16-2011 03:44 PM




All times are GMT -5. The time now is 03:38 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org