What did you do to your Gas Gas today?

[Coop]

Originally Posted by iamovru

Have you seen this light bulb?

http://www.ktmtalk.com/showthread.php?t=490166

Marc

Can't follow that link without being a Ktmtalk member. Just an FYI.

[cbutler]

Originally Posted by Coop

Can't follow that link without being a Ktmtalk member. Just an FYI.

Yep kinda communist if you ask me but this is a link off the pic.

http://s236.photobucket.com/user/cyc..._1862.jpg.html

[Bandit9]

Originally Posted by MargusV

Full Cervantes replica plastic kit arrived today. Looks awesome but needs some tweaking before install - will get rid of these #25 stickers and replace these with a solid red background (#25 is not available in these 3 series we plan to participate). Will replace the black front light/numberplate plastic with a white one.

Post pics when you get it finished. Should look killer.

[bkwdc]

. Ditto.

[iamovru]

Originally Posted by Coop

Can't follow that link without being a Ktmtalk member. Just an FYI.

What? Oh well. looks like it might work well. I also had the PMXTech on my 450 that worked very well. But it is only high beam

[MargusV]

Originally Posted by Bandit9

Post pics when you get it finished. Should look killer.

Thanks - I hope so. I really think that there is nothing wrong with dirt bike being good-looking . While dirt is a natural habitat for our bikes and crashing is just a part of the normal riding process I really hate bent radiators, dented frame tubes, rusted bolts.... you know what I mean. I like my bike tidy, clean and well-maintained.

[Bandit9]

Originally Posted by MargusV

Thanks - I hope so. I really think that there is nothing wrong with dirt bike being good-looking . While dirt is a natural habitat for our bikes and crashing is just a part of the normal riding process I really hate bent radiators, dented frame tubes, rusted bolts.... you know what I mean. I like my bike tidy, clean and well-maintained.

I know exactly what you mean. One little spot of rust will drive me insane.

[MargusV]

Had some ice-racing fun yesterday - race across 5 or 6 lakes, 2 hours, 95% ice, 5% frozen ground, -10 degrees Celsius. Video not ours but #142 visible at about 4.30.

Leigo ice race 2014

[StuJohnson]

Items I worked on over the last 2 days and finally done except for installing the AXP skid plate & re-check my rear sag and check my clickers on the suspension.

-Installed the old “Jeff Melik” front fender
-Installed new Yellow number plate (front & rear)backgrounds
-Oil Change
-Removed Rekluse EXP & all steel plates and clutch fibers for inspection – All Good!!!
-Removed front brake banjo bolt with brake sensor & installed plain banjo bolt
-Flushed, replaced & bled new front brake fluid
-Removed headlight switch as it was not working and hard wired the headlight
-Removed all the misc wire and connectors that are not being used!!!
-Fixed left side lower radiator hose by splicing in a ¾” brass junction
-Removed & Installed new Anti-Freeze
-Removed water pump cover & inspected for any impellor rubbing – just needed a little drimmel work to the CheckPoint AL impellor
-Installed TrailTech temp sensor on upper right side radiator hose for my TrailTech Vector
-Slight adjustments to Lectron Carb & throttle cable
-Switched G2 throttle cam from a #200 to #300 – I find the #300 to work best for me & tight single track trails I ride
-Added new rubber connectors (from McMaster –Carr) to connect lower radiator shrouds – Thanks to GMP & Dessertgasser for this idea!!
-Safety wired upper rad shrouds to lower rad shrouds (I really hate the 2 part shrouds) – Dear GasGas QC Department PLEASE DO SOMETHING DIFFERENT HERE AND MAKE THIS 1 PIECE.!!!!
-Added Velcro to various spots to knock down some of the vibe noises.!!
-Sealed & caulked that little door under the rear fender
-New Rear Tire – Michelin S12 XC








Sent from my iPhone using Tapatalk

[StuJohnson]

Sent from my iPhone using Tapatalk