Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Chassis & Body

Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing.


Reply
 
Thread Tools Display Modes
  #1  
Old 07-20-2014, 11:03 AM
djroggen's Avatar
djroggen djroggen is offline
Senior Member
 
Join Date: Aug 2010
Location: Ortonville, MN
Posts: 575
Default 2013 GasGas Plastics

Just thought it is worth noting.

I used the GoFasters number plate mounting kit to mount a 2009 CRF 450 number plate to my 2013 GasGas 300. To be fair I only used the upper bracket to assist in mounting. I used the headlight mount pegs on the stock front fender. I had to drill alignment holes to allow the crf number plate to slip over the pegs and stay put.

It seems there is a lot of wiring behind the plate so I mainly fitted the plate to allow for the wiring to not "squeek" I will play more later. Ridepg.com graphics are very, very nice.

So, I wanted black rear number plates. So first thought, buy 2014 plates. Nope, does not work, you need a 2014 airbox to allow for this not a big deal but I will have to buy some 13 number plates instead!


__________________
2013 GasGas 300
2004 GasGas 200
2011 GasGas 300
Ortonville Minnesota
Reply With Quote


  #2  
Old 07-21-2014, 08:48 AM
desertgasser300 desertgasser300 is offline
Banned
 
Join Date: Feb 2011
Location: Hot A@% desert AZ.
Posts: 1,872
Default

So the black side plates from a 14' do not fit on 12' or 13? If thus is the case I hope they didnt get included in my plastics order?
Reply With Quote
  #3  
Old 07-21-2014, 08:53 AM
twowheels's Avatar
twowheels twowheels is offline
Senior Member
 
Join Date: Oct 2009
Location: Dearborn MI
Posts: 1,860
Default

They did not.
__________________
Steven Beane #275
PlusOnePerformance - Superior Service the World Over - Dearborn MI
AMA District 14 (Michigan) Officer

afterhourscycle.com
Michigan's Beta and TM Race Headquarters
Reply With Quote
  #4  
Old 07-21-2014, 09:32 AM
desertgasser300 desertgasser300 is offline
Banned
 
Join Date: Feb 2011
Location: Hot A@% desert AZ.
Posts: 1,872
Default

Quote:
Originally Posted by twowheels View Post
They did not.
Its a bummer they don't fit, I was really hoping for black plastics.
Reply With Quote
  #5  
Old 07-21-2014, 11:27 AM
hamilton's Avatar
hamilton hamilton is offline
Gold Level Site Supporter
 
Join Date: Nov 2012
Location: Elkton Md
Posts: 452
Default

Why do you say the 14 side panels won't fit on 12-13? I installed a 14 plastic kit on my 12 no problem.
__________________
15 GASGAS EC 250
19 Sherco SE 125R
Reply With Quote
  #6  
Old 07-21-2014, 05:44 PM
djroggen's Avatar
djroggen djroggen is offline
Senior Member
 
Join Date: Aug 2010
Location: Ortonville, MN
Posts: 575
Default



The alignment holes/tabs are not the same. I would imagine the fenders/shrouds may be the same, but the rear number plates are far from the same. I think if you swapped the airbox, that may allow for the 14 number plates. Maybe if you have the aluminum subframe? I may have to go do some detective work to see the differences.
__________________
2013 GasGas 300
2004 GasGas 200
2011 GasGas 300
Ortonville Minnesota
Reply With Quote
  #7  
Old 07-21-2014, 08:53 PM
hamilton's Avatar
hamilton hamilton is offline
Gold Level Site Supporter
 
Join Date: Nov 2012
Location: Elkton Md
Posts: 452
Default

Well I installed the alum subframe at the same time. I guess the subframe cover slots are different? I'll check when I get a chance.
__________________
15 GASGAS EC 250
19 Sherco SE 125R
Reply With Quote
  #8  
Old 07-21-2014, 10:11 PM
desertgasser300 desertgasser300 is offline
Banned
 
Join Date: Feb 2011
Location: Hot A@% desert AZ.
Posts: 1,872
Default

Ok, you have the plastic subframe on your 13' and the side panels don't fit? But they will fit the aluminum subframe? If this is the case I have the aluminum subframe. Is there a definite answer to this?
Reply With Quote
  #9  
Old 07-21-2014, 10:36 PM
djroggen's Avatar
djroggen djroggen is offline
Senior Member
 
Join Date: Aug 2010
Location: Ortonville, MN
Posts: 575
Default

I'm guessing it may be a 14 subframe. Do you have 2 tab holes or just one tab hole and one bolt hole? The 14 plates have one tab and one hole on the left side of the bike. 13 plates have two tab holes.
__________________
2013 GasGas 300
2004 GasGas 200
2011 GasGas 300
Ortonville Minnesota
Reply With Quote
  #10  
Old 07-22-2014, 05:39 PM
hamilton's Avatar
hamilton hamilton is offline
Gold Level Site Supporter
 
Join Date: Nov 2012
Location: Elkton Md
Posts: 452
Default

Quote:
Originally Posted by desertgasser300 View Post
Ok, you have the plastic subframe on your 13' and the side panels don't fit? But they will fit the aluminum subframe? If this is the case I have the aluminum subframe. Is there a definite answer to this?
If you have the alum subframe and single tab number plates now, the 14 number plates will fit. Just lose the left hand alum spacer from the mounting bolt.
__________________
15 GASGAS EC 250
19 Sherco SE 125R
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
when did gasgas change plastics whodat General Discussions & Announcements 2 06-24-2009 06:56 AM
GasGas plastics from Cemoto MattR Enduro Product Announcements 5 06-19-2008 07:20 PM




All times are GMT -5. The time now is 05:06 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org