|
Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
EC 250 05 noo idle. settings??
I can`t get my bike to idle. It is idling for some time then it goes down in idle and stops short after that.
my setting is mainJet: #185 idle jet: #38 temp: 15-25 C height over sea: 50-100meters needle is N1EC notch 4 position. Any tips?? |
#2
|
|||
|
|||
First set your float level correctly. I run my float level on the low side to get proper idle on downhills and reduce fuel overflow on steep downhills. Others have done likewise.
Are you a do it yourself jetting person? If so, look at the jetting database to get ideas of what others have done. Most effective for trail riding is often the single taper needles and the appropriate pilot jet & main jet. As a note you currently have a triple taper needle which tends to run richer at low throttle near idle. If you are not into do it youself jetting, then the best solution is the RB Designs carb mod. It will fix your idle issues.
__________________
Eric K '06 GasGas EC300 '01 GasGas XC300 |
#3
|
|||
|
|||
Okej thanx for answer. But how do i set my float level correctly?? any tips or links to sites that can explain.
|
#4
|
|||
|
|||
Quote:
http://www.gasgasrider.org/forum/showthread.php?t=566 http://scootrs.com/tech.cfm?tip=float http://www.youtube.com/watch?v=_qAVXneKAkU
__________________
2003 EC250 w/ Ohlins pkg Sometimes you eat the bear, sometimes the bear eats you. |
#5
|
|||
|
|||
In the video the guy uses a rigged tool the check float level, but I have seen the other way, just can't find the picture.
__________________
2003 EC250 w/ Ohlins pkg Sometimes you eat the bear, sometimes the bear eats you. |
#6
|
|||
|
|||
Quote:
http://www.trialscentral.com/forums/...e=post&id=6019
__________________
2003 EC250 w/ Ohlins pkg Sometimes you eat the bear, sometimes the bear eats you. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
450 fork settings? | splint | Enduro Suspension | 0 | 10-14-2008 03:30 AM |
04 ec300 w/WP's, ESR valved. Settings? | socalscott | Enduro Suspension | 0 | 04-28-2008 03:19 AM |
02 ec 200 stock settings | Airborne | Enduro Suspension | 0 | 06-24-2007 07:49 AM |
03 ec 200 stock settings? | Airborne | Enduro Intake/Carburetion - 2 stroke | 0 | 06-24-2007 07:45 AM |
best settings for sand | catch22 | Enduro Suspension | 10 | 09-08-2006 11:26 AM |