|
|
|||||||
| General Discussions & Announcements General Announcements, General Questions, e.g. What bike do I buy?, etc. |
 |
|
|
Thread Tools | Display Modes |
|
#1
03-22-2007, 04:48 PM
|
||||
|
||||
Machining Project Part 3: Stainless Wheel Spacers
Hi guys,
Here's my last project from my machining class.  They're made from 416, which isn't the preferred material (that would be 440) but it is still heat treatable. The good side is 416 machines pretty easy (compared to some of the other stainless steels) so I made 2 sets of wheel spacers. Hopefully I'll be able to make some more down the road. I also want to make some aluminum ones and either hard anodize them or use a HVOF coating on them and see how they compare to the stainless steel spacers. 
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| aftermarket wheel spacers | randy | Enduro Chassis & Body | 4 | 08-20-2010 06:30 AM |
| Aftermarket wheel spacers. | Wiggy | Enduro Chassis & Body | 1 | 04-01-2010 05:14 PM |
| Machining Project Part 2: Bar Mounts | SpeedyManiac | General Discussions & Announcements | 2 | 03-06-2007 07:47 PM |
| Machining project part 1: New Oil plugs | SpeedyManiac | General Discussions & Announcements | 9 | 02-06-2007 07:35 AM |
| Taking a machining class: Project Ideas? | SpeedyManiac | General Discussions & Announcements | 4 | 01-21-2007 05:42 PM |
Linear Mode
