Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Intake/Carburetion - 2 stroke

Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 11-10-2020, 04:38 AM
Beastie Boy's Avatar
Beastie Boy Beastie Boy is offline
Member
 
Join Date: Mar 2020
Location: Sydney Australia
Posts: 52
Default 2019 EC 300 Air filter Fitting

Changing out the air fiter for the first time

Got a new funnel web and oiled it up.

Fitted it up and at first it sealed ok at the left side but not on the upper side. A bit of wiggling and it seemed to fit better on the top with the black seal surface surface making good contact with the air box.

When I fiited the spring loaded rod it fitted into the platic cup at the back of the airbox but it seems to be at a strange angle.

Hopefully you can see this from the photos. Have i messed up? Is there some tips/ tricks to replacing the filter? Or does it look ok?
[ATTACH][ATTACH][ATTACH][ATTACH]20201110_170612.jpg[/ATTACH][/ATTACH][/ATTACH][/ATTACH]
Attached Images
File Type: jpg 20201110_170531.jpg (116.3 KB, 26 views)
File Type: jpg 20201110_170542.jpg (124.3 KB, 26 views)
File Type: jpg 20201110_170549.jpg (118.7 KB, 23 views)
File Type: jpg 20201110_170600.jpg (123.9 KB, 23 views)


__________________
2019 EC 300
Reply With Quote


  #2  
Old 11-10-2020, 04:40 AM
Beastie Boy's Avatar
Beastie Boy Beastie Boy is offline
Member
 
Join Date: Mar 2020
Location: Sydney Australia
Posts: 52
Default

Two more photos

20201110_170615.jpg

20201110_170625.jpg
__________________
2019 EC 300
Reply With Quote
  #3  
Old 11-10-2020, 10:26 PM
Gez Gez is offline
Senior Member
 
Join Date: Jun 2019
Posts: 132
Default

Both my twin air and uni filters do seem to flare up a touch on the flange side like yours. I've found that you need to press down in different locations around the outside edge of the filter towards the engine 3 or 4 times until you feel it isn't seating any further.
I've never had any dust make it through doing it this way, not sure about the spring clip though.
Reply With Quote
  #4  
Old 11-11-2020, 03:17 AM
Beastie Boy's Avatar
Beastie Boy Beastie Boy is offline
Member
 
Join Date: Mar 2020
Location: Sydney Australia
Posts: 52
Default

Thnbaks for the feedback....yeah I found I had to keep pushing around the edges to get it to seat
__________________
2019 EC 300
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Fitting a keyignition to a EC 125 05 Wilmer Enduro Electrical & Wiring 0 01-09-2018 03:27 AM
2000 air filter vs. 2011 filter? nknudsen Enduro Intake/Carburetion - 2 stroke 2 05-22-2014 12:00 PM
AIR FILTER BOX RUBBER and CARB Fitting (ec200 2011 sixd) eliasn101 Enduro Engine - 2 stroke 13 07-12-2013 10:48 AM
Nambotin fitting in well at KTM Keg General Discussions & Announcements 9 01-14-2012 10:07 AM
Fitting map switch to 200? blanc General Discussions & Announcements 7 12-14-2010 07:44 AM




All times are GMT -5. The time now is 04:29 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org