|
General Discussions & Announcements General Announcements, General Questions, e.g. What bike do I buy?, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Axle Size Gasgas ec 125
What size is the front and back axle on an EC 125?
I want to apply KTM supermoto wheels and rims that fit on a 26mm front and 20mm rear axle. |
#2
|
||||
|
||||
Check the bearing part numbers for the year bike and work backwards. For the older 2001 to 2004 the 125 wheels and axles were the same as the 250 and 300 bikes.
|
#3
|
||||
|
||||
I would guess 25mm front and 20mm rear axle diameters.
Adapting the front is normally mostly a matter of turning some spacers or replacing bearings. The rear is usually more difficult. Sent fra min YAL-L21 via Tapatalk
__________________
Anders "So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie) 2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper 2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper 1998 Bimota Supermono 1986 Duc Mille S2 1975 Guzzi sidecar hack 1961 Morini Corsaro 125 etc |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
What is your favorite GasGas engine size? | MattR | GasGas Member Polls | 51 | 09-11-2014 10:12 AM |
gasgas physical size | ks9mm | General Discussions & Announcements | 20 | 07-03-2014 01:36 PM |
Main Jet Motorcycles Enduro Axle Nut/Wrench/Axle Pull | HydroDog | Enduro Product Reviews | 2 | 09-24-2009 12:12 AM |
GasGas Front Axle Grab | Berkyboy | Enduro Product Announcements | 3 | 03-11-2007 06:32 AM |