|
Archive of For Sale Forum Old Common For Sale Forum (Temporary) |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Parts blowout: Rekluse clutch, BRP triple clamps & SUB mount, brake pedals, etc
Getting rid of some of my parts inventory.
Rekluse Z-start clutch: Complete clutch from Rekluse, includes all of the original pieces (pressure plate, springs, steel balls, gasket, brake pedal spacer, etc) PLUS 15 tungsten balls, 2x0.059" steel drive plates (stockers), 2x0.055" steel drive plates and 12x0.045" steel drive plates. All parts are used but in good condition. $400 plus shipping. Stock fiber clutch plates: Used but still in good condition. Lots of life left. 8 plates. $70 plus shipping. Clutch inner hub: Used, but still has lots of life left in it. Some grooving so I replaced it when I did my clutch basket. $50 plus shipping. Last edited by SpeedyManiac; 12-16-2009 at 10:35 AM. |
#2
|
||||
|
||||
Clutch basket:
Useable for someone on a budget. Better idea is if you need the drive gears then this would be a perfect candidate to use the gears for on a difference basket. Basket teeth are grooved but still useable. There is part of the basket chipped out (see photo). $50 plus shipping for the basket including crankshaft drive gear. Shark Fin: Dinged up but still good to go. $20 plus shipping. |
#3
|
||||
|
||||
BRP/Scotts triple clamp:
Part #6043-12. Fit on all of my Gassers (see above list). $100 plus shipping. Steering stabilizer tower (bolt on): Cut down for a super low sub mount I built. The damper sat on an 8mm plate on the triple clamp, so this collar was cut accordingly. $30 plus shipping. Stock rear brake rotor: Nearly new, almost zero wear. $70 plus shipping. Last edited by SpeedyManiac; 12-10-2009 at 09:25 PM. |
#4
|
||||
|
||||
Stock 48 tooth rear sprocket:
2 available, both with only a couple hours on them. One has about 90% life left, the other about 80% life left. $40 for the almost new one, $30 for the other one. Both prices do no include shipping. Stock 49 tooth rear sprocket: Some wear but has about 70% life left. $20 plus shipping. Rear brake pedal: Stock, brand new. Scuffed up from time spent in my tool bag. $70 plus shipping. |
#5
|
||||
|
||||
Damaged rear brake pedal:
This one is pretty rough. The pivot is still good but the tip is broken. Easily fixed with some welding or brazing. $20 plus shipping. Rear wheel adjusters: Two of them. Brand new, bought as spares for ISDE. $25 plus shipping. Steering head bearing: Includes bearing and race. Brand new still in the package. $15 plus shipping. Left footpeg: Slightly bent but still useable. $15 plus shipping. |
#6
|
||||
|
||||
Stock radiator louvres:
Cut to fit LTR radiator braces. $10 plus shipping for both. Right side radiator: Bent but doesn't leak. Off a 2007 EC250. Could be straightened or used as is. $60 plus shipping. All prices do not include shipping. Shipping will be by Canada Post from Keremeos, BC for shipments to USA to avoid hefty border crossing fees. Shipping costs are usually around $10 depending on the size/weight of the package. Paypal or post office money orders accepted. Last edited by SpeedyManiac; 12-10-2009 at 09:26 PM. |
#7
|
||||
|
||||
BUMP. No one needs parts for their Gasser? Prices are negotiable.
|
#8
|
||||
|
||||
Speedy, I would love to have the Rekluse BUT Santa has to visit first and then IF I have any money left and you still have it I'll take it off your hands
:-)
__________________
Fred Overstreet 2010 EC250 SixDays 2004 GasGas EC300 -Sold to a good home 2006 GasGas EC250-Sold to a good home 2006 GasGas TXT 280 Pro |
#9
|
|||
|
|||
roter
Is that the best price you can do.
|
#10
|
|||
|
|||
Okay, I'll admit I'm new to FWW, but are you sure that's the actual FWW? The reason I ask is from this thread where the guy posts a pic and someone side the FWW is the bronze piece behind the darker piece on the outside. That outside piece looks just like what you are selling?
I've got what I think is a 2000 EC250. I'm trying to find out if someone can tell me for sure by my VIN what exact model I have and what FWW might work? We just had a FWW put on my wife's KX100 and I really liked what it did to that bike. The Stealhy site only lists the FWW for the XC & DE so if I have an EC not sure one would even work? - http://www.steahlyoffroad.com/weight...?s_partnum=404 I'm very interested in the Rekluse also, as I rode a KTM300 a few years ago that had one, and I loved the way it rode. I just have a really tight budget right now. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Milling out triple clamps? | Cruiser | General Discussions & Announcements | 3 | 01-20-2010 08:53 PM |
Bitchin' triple clamps available?! | robinator | Enduro Suspension | 0 | 05-08-2009 09:43 PM |
Triple Clamps clearance- Does this looks right?! PIX INSIDE | alexpp | General Discussions & Announcements | 8 | 04-15-2009 09:14 PM |
Rekluse Clutch Brake Lever | kim | Enduro Engine - 2 stroke | 2 | 02-15-2008 07:41 PM |