Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > General Forums > General Discussions & Announcements

General Discussions & Announcements General Announcements, General Questions, e.g. What bike do I buy?, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 10-04-2022, 04:25 PM
Noobi06 Noobi06 is offline
Senior Member
 
Join Date: Sep 2022
Posts: 191
Default Axle Size Gasgas ec 125

What size is the front and back axle on an EC 125?
I want to apply KTM supermoto wheels and rims that fit on a 26mm front and 20mm rear axle.


Reply With Quote


  #2  
Old 10-04-2022, 10:17 PM
Zman's Avatar
Zman Zman is offline
Platinum Level Site Supporter
 
Join Date: Apr 2010
Location: Burbs of Chicago
Posts: 1,818
Default

Check the bearing part numbers for the year bike and work backwards. For the older 2001 to 2004 the 125 wheels and axles were the same as the 250 and 300 bikes.
Reply With Quote
  #3  
Old 10-05-2022, 01:22 PM
Anders's Avatar
Anders Anders is offline
Gold Level Site Supporter
 
Join Date: Nov 2009
Location: Kongsberg, Norway
Posts: 1,113
Default

I would guess 25mm front and 20mm rear axle diameters.

Adapting the front is normally mostly a matter of turning some spacers or replacing bearings. The rear is usually more difficult.

Sent fra min YAL-L21 via Tapatalk
__________________
Anders

"So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie)

2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper
2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper
1998 Bimota Supermono
1986 Duc Mille S2
1975 Guzzi sidecar hack
1961 Morini Corsaro 125
etc
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
What is your favorite GasGas engine size? MattR GasGas Member Polls 51 09-11-2014 10:12 AM
gasgas physical size ks9mm General Discussions & Announcements 20 07-03-2014 01:36 PM
Main Jet Motorcycles Enduro Axle Nut/Wrench/Axle Pull HydroDog Enduro Product Reviews 2 09-24-2009 12:12 AM
GasGas Front Axle Grab Berkyboy Enduro Product Announcements 3 03-11-2007 06:32 AM




All times are GMT -5. The time now is 08:42 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org