Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine 4 stroke (including EFI & Exhaust)

Enduro Engine 4 stroke (including EFI & Exhaust) 4 stroke engine, EFI, and exhaust discussion

Thread Tools Display Modes
Old 11-08-2015, 04:23 PM
Victory6541 Victory6541 is offline
Join Date: Sep 2015
Posts: 7
Exclamation 450FSR 2008 Valves and ignition

Hey ppl!

I'm having trubble finding the right valve adjustment setup. How to place the exhaust and intake camshafts.

Also another issue were the bike runs smooth while idle. But as soon as you turn the throttle abit it wants to die any idea what it could be?

Regards Jocke a typical sweed

Reply With Quote

Old 11-15-2015, 02:37 PM
Leeky Leeky is offline
Join Date: Mar 2015
Location: Rugby, Warwickshire
Posts: 18

Hi, do you have a copy of the workshop manual? I googled it and found one. Follow the pics and ensure you get the arrows on the cams pointing to the correct pin (left pin on the link for the exhaust cam on my 04 engine from memory and then count the 15 pins back to the inlet arrow) this sets the cam to crank relationship.

If you get this wrong (like I did initially) it will run but is terrible to start and won't pickup properly, it also kept cutting out on idle.
Reply With Quote
Old 03-11-2016, 02:29 PM
redvan redvan is offline
Join Date: Mar 2016
Posts: 5

Hello, i am from spain.

Where can i buy the electrical diagram of fse450 2009?

I looking for it and i havent found it. I am deses?rate....

Thank you!!!
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Gas Gas 125 power valves geoffg Enduro Engine - 2 stroke 8 10-28-2010 02:23 PM
after market base valves 45/50mm marzocchi armyoforange Enduro Product Announcements 9 01-23-2010 11:58 PM
reed valves for VF3 perfex Enduro Intake/Carburetion - 2 stroke 16 03-14-2009 12:47 AM
Snapped valves on 02 400 douglase1983 Enduro Engine 4 stroke (including EFI & Exhaust) 3 01-10-2009 02:33 PM
08 450fsr electrics splint General Discussions & Announcements 1 06-04-2008 04:41 AM

All times are GMT -5. The time now is 09:37 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2023, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org