Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine - 2 stroke
Reload this Page pv breather
Register FAQ Calendar Mark Forums Read

Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 02-18-2009, 07:54 PM
jprh jprh is offline
Member
  
Join Date: Nov 2008
Location: sydney australia
Posts: 39
Question pv breather
ec250 2001 lost my pv breather pipe replaced it but cant find were it connects to at the other end any help would be appreciated cheers? JPRH


Reply With Quote


  #2  
Old 02-18-2009, 08:02 PM
GMP's Avatar
GMP GMP is offline
Senior Member
  
Join Date: Jul 2006
Location: Jefferson Twp., NJ
Posts: 7,597
Default
If your talking about the upper breather from the cyl., that is also your trans vent. Run it up high on the frame or to the airbox to keep water out. If its the lower drain just zip tie it to the frame so it can vent/drip (don't pinch it).
Reply With Quote
  #3  
Old 02-19-2009, 11:26 PM
jprh jprh is offline
Member
  
Join Date: Nov 2008
Location: sydney australia
Posts: 39
Smile GMT thanks mate
thanks mate, now i know why i couldnt find a place for it ,it aint got one!
Reply With Quote
  #4  
Old 02-20-2009, 01:56 PM
gasser250sm gasser250sm is offline
Member
  
Join Date: Nov 2008
Location: Telford, UK
Posts: 79
Default
Some one put a bolt at the end of my pv breather LH side (lower one) shall i take it off or leave it ? thanks
__________________
2001 Gas Gas EC250 Supermoto

Boyesen Pro Series Reeds, Messico & Modified FMF TC II, Black Powdercoated Wheels & Hubs, Red Renthal Fatbars, Polisport Handguards, 4 POT Brembo Front Brake W/ Floating Rotor

Want:
Doma,Messico Or 06 GG Front Pipe, RB Carb & Head Mod, DE250, XC250 Or EC200 CDI
(If you have any of these parts PM me!)
Reply With Quote
  #5  
Old 02-20-2009, 02:17 PM
GMP's Avatar
GMP GMP is offline
Senior Member
  
Join Date: Jul 2006
Location: Jefferson Twp., NJ
Posts: 7,597
Default
Take it out, but get a bucket first!
Reply With Quote
  #6  
Old 02-21-2009, 08:38 PM
jprh jprh is offline
Member
  
Join Date: Nov 2008
Location: sydney australia
Posts: 39
Thumbs up G M P
sorry i screwed ur NAME up, nice way to thank you for ur help !
Reply With Quote
Reply



« Previous Thread | Next Thread »
Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
new GG member with some GG questions powervalve breather and overflow bottle swazi_matt Enduro Engine - 2 stroke 8 02-04-2011 10:24 AM
white gunk coming from crankcase breather tube Crankin04 Enduro Engine 4 stroke (including EFI & Exhaust) 22 07-18-2010 09:58 AM
Oil leak from breather pipe TXT pro 250 jamesukm General Discussions & Announcements 0 04-22-2010 12:59 AM
Take out spark arrester for FMF PCII? PV breather + Silencer lengths gasser250sm Enduro Engine - 2 stroke 0 02-20-2009 02:00 PM




All times are GMT -5. The time now is 08:06 AM.

Contact Us - GasGasRider.org - Top

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org